Sony F35 Product Manual (CAF101 Operations Manual 1st ED) - Page 18

Overview - used

Page 18 highlights

Overview The CA-F101 Optical Fiber Camera Adapter is designed to be directly mounted on a Sony F23 or F35 Digital Cinematography Camera, achieving signal transmission and interface between the camera and the SRW-1 HD Portable Digital Recorder/SRPC-1 HD Video Processor via a hybrid optical camera cable. Video of RGB4:4:4 up to 1080/30P or Y Cb Cr 4:2:2 up to 1080/60P can be transmitted along with 2-channel audio and control signals via a single hybrid optical camera cable (1 km long at maximum). In a system where the camera and recorder are to be operated in the undocked condition, the number of cables between the camera and recorder can be decreased, for smooth system operations. Various camera controls, including the Select FPS function, are also enabled by connecting a camera remote control unit to the recorder as the base station. Note When using the CA-F101, confirm that the devices to be used in combination match the following requirements: • The HKSR-101 Optical Interface Unit has been mounted on the SRPC-1 HD Video Processor. • The F23/F35 Digital Cinematography Camera is Ver. 1.3 or later. • The SRW-1 and SRPC-1 are Ver. 2.6 or later. • When using the Select FPS function, the HKSR-102 Picture Cache Board has been installed in the SRW-1. Basic System Configuration This unit is designed assuming usage in the following system. Viewfinder a) Cable that conforms to ARIB (BTA S-1005B), ANSI/SMPTE (304M-1998/ 311M-1998), or EBU (R100-1999) b)The RM-B750 can also be connected to the RM connector of the camera. Note however that simultaneous connection to both the camera and recorder is not allowed. Camera menu operations from the LCD of the RM-B750 is enabled only when the RM-B750 is connected to the camera. HDVF-C950W Interface box (supplied with F23/F35) HDVF-C35W ff T 1.6 2 60 30 20 15 12 10 2.8 4 5.6 8 11 16 8 CL 7 6554..66 F23/F35 Digital Cinematography Camera 1 1 2 3 FILTER 1 CLEAR 2 1/4 ND ND 3 1/16ND 4 1/64ND 5 CAP A 5600K B 3200K CC C 4300K D 6300K E 1/2 ND LOCK VF MENU/DISPLAY CANCEL/STATUS 1 CA-F101 BKP-L551 Battery Adaptor + BP-GL95 Battery Pack RUN 4 AUTO BLK BAL PAGE SET PRO DC 12 V power Hybrid optical camera cablea) SRW-1 HD Portable Digital Recorder SRPC-1 HD Video Processor + HKSR-101 Optical Interface Unit DC 12 V power 4 : 2 : 2 4 : 2 : 2 HD monitor HD monitor RM-B750 Remote Control Unitb) Note Power supply via the hybrid optical camera cable is not included in this system. Supply power independently to the camera and the recorder. 18 Overview

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

18
Overview
Overview
The CA-F101 Optical Fiber Camera Adapter is designed to
be directly mounted on a Sony F23 or F35 Digital
Cinematography Camera, achieving signal transmission
and interface between the camera and the SRW-1 HD
Portable Digital Recorder/SRPC-1 HD Video Processor
via a hybrid optical camera cable.
Video of RGB4:4:4 up to 1080/30P or Y Cb Cr 4:2:2 up to
1080/60P can be transmitted along with 2-channel audio
and control signals via a single hybrid optical camera cable
(1 km long at maximum).
In a system where the camera and recorder are to be
operated in the undocked condition, the number of cables
between the camera and recorder can be decreased, for
smooth system operations.
Various camera controls, including the Select FPS
function, are also enabled by connecting a camera remote
control unit to the recorder as the base station.
When using the CA-F101, confirm that the devices to be
used in combination match the following requirements:
The HKSR-101 Optical Interface Unit has been mounted
on the SRPC-1 HD Video Processor.
The F23/F35 Digital Cinematography Camera is Ver. 1.3
or later.
The SRW-1 and SRPC-1 are Ver. 2.6 or later.
When using the Select FPS function, the HKSR-102
Picture Cache Board has been installed in the SRW-1.
Basic System Configuration
This unit is designed assuming usage in the following system.
Power supply via the hybrid optical camera cable is not included in this system. Supply power independently to the camera
and the recorder.
Note
1
2
3
LOCK
VF MENU/DISPLAY
CANCEL/STATUS
4
AUTO
BLK
BAL
PAGE
RUN
SET
1
1
PRO
60
5.6
8
11
16
CL
2.8
2
1.6
T
ff
4
30
20
15
12
10
8
7
6
5.6
5
4.6
CA-F101
4 : 2 : 2
4 : 2 : 2
Viewfinder
HDVF-C950W
HDVF-C35W
Interface box
(supplied with F23/F35)
BKP-L551 Battery Adaptor
+ BP-GL95 Battery Pack
Hybrid optical camera cable
a)
F23/F35 Digital
Cinematography
Camera
DC 12 V power
DC 12 V power
HD monitor
HD monitor
RM-B750
Remote Control Unit
b)
SRW-1
HD Portable
Digital Recorder
SRPC-1
HD Video
Processor
+ HKSR-101
Optical Interface
Unit
a)Cable that conforms to ARIB (BTA S-1005B), ANSI/SMPTE (304M-1998/
311M-1998), or EBU (R100-1999)
b)The RM-B750 can also be connected to the RM connector of the camera.
Note however that simultaneous connection to both the camera and recorder
is not allowed. Camera menu operations from the LCD of the RM-B750 is
enabled only when the RM-B750 is connected to the camera.
Note