Sony FA-WRC1M Help Guide - Page 2

Refer to the dedicated support site for information on camera compatibility. [2] Before use Before use This product can be used in combination with Sony Interchangeable Lens Digital Cameras that have a Multi Interface Shoe. Some functions may not be available depending on the model of the camera you use. Refer to the Sony website for your region for details on this product's compatibility with your camera. Along with this manual, refer to the operating instructions of your camera. This product is designed to be dust and moisture-resistant, but is not waterproof or splash-proof. When you use the product in rainy conditions, do not let the product get wet. Locations to avoid Regardless of whether this product is in use or in storage, do not place it in any of the following locations. Doing so may cause a malfunction. In extremely hot locations In locations such as a car parked in the sun, the product may become deformed resulting in a malfunction. Under direct sunlight or near a heater The product may become deformed resulting in a malfunction. In locations with excessive vibration Near strong magnetic fields In sandy or dusty areas such as on the beach Be careful not to let sand or dust get inside the product when using it on the beach or other sandy areas. This may cause a malfunction. Flash sync terminals Flashes that have a sync terminal with reversed polarity can be used with this product. Use flashes with a sync voltage of 400 V or lower. Turn off the flash connected to the sync cord when you connect the sync cord to the (flash sync) terminal. Otherwise, the flash may emit light when the sync cord is connected. When you are using a flash connected to the (flash sync) terminal, set the shutter speed to the slower of the following values or slower. The flash sync speed of the camera The shutter speed recommended by the flash