Sony FCBH11 Product Manual (FCB-H11 Technical Manual) - Page 15

Zoom/Focus Mode Command CAM_Zoom Tele/Wide/Stop CAM_Zoom Direct D-Zoom Limit CAM_Focus Far/Near/Stop CAM_Focus Direct CAM_Focus Mode (Auto/Manual) CAM_Focus One Push Trigger CAM_Focus Infinity CAM_Focus Near Limit Power Off1) IFC2) Initializing3) Zoom Direct × a × a a a a a a Power On Focus Direct a a a × a × × × × AF ON a a a × × a × a a During displaying a still image Memory Recall 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the lens is initialized, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. White Balance Mode Command CAM_WB Auto/Indoor/Outdoor/ OnePUshWB/Manual CAM_WB One Push Trigger CAM_WB R(B) Gain Reset/Up/Down/Direct Power Off1) × × × IFC2) × × × Initializing3) × × × Auto a × × Power On White balance mode Indoor Outdoor One Push a a a × × a4) × × × Manual During displaying Memory Recall a still image a × × × × × a × × 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the lens is initialized, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) Commands are ignored during a One Push AWB operation. Basic Functions 15