Sony FW-32BZ30J Reference Guide - Page 3

CAUTION To prevent electric shock and blade exposure, do not use this AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted. • Operate the LCD Display only on 110 V - 240 V AC (U.S.A./ Canada 120 V AC) (except models with supplied AC adapter). • Operate the LCD Display only on DC 19.5 V (with AC adapter). Safety Information Notice for customers in the United States of America Supplier's Declaration of Conformity Trade Name: SONY Model: FW-100BZ40J / FW-75BZ30J / FW-65BZ30J / FW-55BZ30J / FW-50BZ35J / FW-50BZ30J / FW-43BZ35J / FW-43BZ30J / FW-32BZ30J Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 FCC Related Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or LCD Display reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/LCD Display technician for help. Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Safety and Regulatory 5 GHz bands are restricted to indoor operations only. Notice for customers in Canada This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Notice for customers in the United States of America and Canada This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles). This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant condition. Compatible Wall-Mount Bracket Information Use the following Sony Wall-Mount Bracket with your LCD Display model. US Sony Wall-Mount Bracket Model No. Sony LCD Display Model No. FW-75BZ30J / 65BZ30J / 55BZ30J SU-WL855*1 Use with other Wall-Mount Brackets*2 may cause instability and could result in property damage or injury. *1 Only on limited region/country/LCD Display model. *2 For instructions on using the Wall-Mount bracket with your LCD Display please go to https://www.sony.com/ am/support for your LCD Display model and download "Wall-Mount Bracket". To Customers Sufficient expertise is required for LCD Display installations. Be sure to subcontract the installation to a Sony dealer or licensed contractor and pay adequate attention to safety during the installation. Before setting up your LCD Display Some LCD Display models are packaged with a detached Table-Top Stand so you can mount your LCD Display to a wall right away. See "Installing the LCD Display to the Wall" if you want to mount the LCD Display to a wall. If you are not mounting the LCD Display to a wall, you will need to attach the Table-Top Stand (refer to the Setup Guide). Be sure to consider the following while setting up your LCD Display: • Disconnect all cables when carrying the LCD Display. • Carry the LCD Display with the adequate number of people; larger size LCD Displays require two or more people (four or more people for FW-100BZ40J). • Correct hand placement while carrying the LCD Display is very important for safety and to avoid damage. 3US