Sony FX810 Operating Instructions - Page 24

When a menu screen appears on the LCD screen. - Prepare the power supply, 1. Open the outer cover and slide the POWER switch to the right to turn the unit on. The power indicator lights up in green. 2. Slide the Lid open knob to open the disc lid and insert a disc onto the side you want to play, label up. Close the disc lid by hand, • tf the disc is placed in upside down (and it is a single sided disc)," No Disc" or "Check Disc" appears on the LCD screen. 3, Press PLAY to start play. • After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen. 4, Adjust the volume, • Reduce the volume before playback, then gradually increase it. In case of interactive DVD with control, a menu screen appears on the LCD screen. Press ÷/+ / 4,t ÷and press ENTER, or press the number buttons to select the desired item. Playback of the selected item begins. For further information, also refer to the jacket or case of the disc you are playing. NOTES: * Place a disc with the playback side down on the spindle, and push gently on the center of the disc so it goes into position. • Confirm LCD MODE position by pressing LCD MODE button (page 25-26), • If parental control is set and the disc is not within the rating settings, you must input the password. (See "PARENTAL CONTROL" on page 42-43.) * DVD may have a region code. Your player does After operation When the unit is not in use, remove the disc and slide the not play discs that have a region code different from your player. POWER switch to the right and hold it there to turn off the DVD player. The power indicator turns off. 24