Sony GV-D200 Operating Instructions
Sony GV-D200 - Digital VCR - Dark Manual
 |
UPC - 027242582385
View all Sony GV-D200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony GV-D200 manual content summary:
- Sony GV-D200 | Operating Instructions - Page 1
this manual thoroughly, and retain it for future reference. Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. GV-D200 Serial - Sony GV-D200 | Operating Instructions - Page 2
, NJ 07656 CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Declaration of Conformity Trade Name: SONY Model No.: GV-D200 Responsible Party:Sony Electronics Inc. Address: 1 Sony Drive, Park - Sony GV-D200 | Operating Instructions - Page 3
- Digital program editing 37 Using with an analog video unit and a personal computer - Signal convert function 47 Inserting a scene from the other (playback) VCR - Insert Editing 48 Customizing Your VCR Changing the menu settings 50 Resetting the date and time 55 Additional Information Digital8 - Sony GV-D200 | Operating Instructions - Page 4
this manual, buttons and settings on your VCR are shown in capital letters. e.g. Set the POWER switch to ON. When you carry out an operation, you can hear a beep sound to indicate that the operation is being carried out. Before using your VCR With your VCR, you can use Hi8 /Digital8 video cassettes - Sony GV-D200 | Operating Instructions - Page 5
Getting started Using this manual Precautions on VCR care •Do not let your VCR get wet. Keep your VCR away from rain and sea water. Letting your VCR get wet may cause your VCR to malfunction. Sometimes this malfunction cannot be repaired [a]. •Never leave your VCR exposed to temperatures above 140 - Sony GV-D200 | Operating Instructions - Page 6
Checking supplied accessories Make sure that the following accessories are supplied with your VCR. 1 2 3 1 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 7, 9) 2 A/V converting cable (1) (p. 18, 47) 3 A/V connecting cable (1) (p. 7, 18, 35, 47) 6 - Sony GV-D200 | Operating Instructions - Page 7
RFU adaptor (not supplied). Refer to the operating instructions of your TV or the other VCR and the RFU adaptor. With an RFU adaptor, the sound is monaural even on stereo models. If your TV or the other VCR has an S video jack Connect using an S video cable (not supplied) to obtain high-quality - Sony GV-D200 | Operating Instructions - Page 8
to the DC IN jack, even when the power cord is not plugged into a wall outlet. •Keep the AC power adaptor away from your VCR if the picture is disturbed. When you use your VCR outdoors Use the battery pack (not supplied) (p. 9). Using a car battery Use the Sony DC Adaptor/Charger (not supplied). 8 - Sony GV-D200 | Operating Instructions - Page 9
started Step 2 Preparing the power supply Using with a battery pack (not supplied) Install the battery pack to use your VCR outdoors. Your VCR operates only with the "InfoLITHIUM" battery pack (L series). Installing the battery pack Press and slide the battery pack in the direction of the arrow - Sony GV-D200 | Operating Instructions - Page 10
Step 2 Preparing the power supply Charging the battery pack Use the battery pack after charging it for your VCR. You can charge the battery with your VCR. (1) Install the battery pack. (2) Open the DC IN jack cover and connect the AC power adaptor (supplied with your VCR) to the DC IN jack with the - Sony GV-D200 | Operating Instructions - Page 11
) Approximate number of minutes when you use a fully charged battery pack Numbers in parentheses "( )" indicate the time using a normally charged battery pack. The battery life will be shorter if you use your VCR in a cold environment. You can charge the battery pack abroad For details, refer to - Sony GV-D200 | Operating Instructions - Page 12
We recommend using Hi8 /Digital8 video cassettes. (1) VCR to malfunction. •Your VCR records pictures in the Digital8 system. •The recording time when you use your VCR is half of indicated time on Hi8 tape. If you select the LP mode in the menu settings, 3/4 of indicated time on Hi8 tape. •If you use - Sony GV-D200 | Operating Instructions - Page 13
start playback. DISPLAY 3 OFF ON POWER 4 PLAY REW STOP FF To stop playback Press x. Notes on the DISPLAY button • When you connect your VCR to a TV, you can confirm the screen indicators on the monitor screen. • Press DISPLAY to display the screen indicators. To make the indicators disappear - Sony GV-D200 | Operating Instructions - Page 14
tape Various playback modes To operate the video control buttons, set the POWER switch to ON. To view a still image (playback pause) Press X during playback. as a mosaic image when playing back in the Digital8 system. •The VCR does not automatically detect Digital8 or Hi8/standard 8 system in - Sony GV-D200 | Operating Instructions - Page 15
details about the sound mode, refer to page 50. (5) Press MENU to make the menu disappear. 1 MENU 3 VCR SET P EFFECT HiFi SOUND TBC DNR AUDIO MIX PB MODE A/V DV OUT RETURN STEREO [MENU] : END 4 VCR SET P EFFECT HiFi SOUND TBC DNR AUDIO MIX PB MODE A/V DV OUT RETURN STEREO 1 2 [MENU] : END - Sony GV-D200 | Operating Instructions - Page 16
your VCR using the Remote Commander supplied with a Sony product. Set COMMANDER in the menu settings, according to the remote control code of the Sony product. Code VTR 1 VTR 2 VTR 3 VTR 4 VTR 5 and 6 Sony product Betamax VCR 8mm video camera recorder Digital video camera recorder 8mm VCR VHS VCR - Sony GV-D200 | Operating Instructions - Page 17
you use a Sony TV •You can turn on the TV automatically when you press SUPER LASER LINK. To do so, make sure you - Turn the TV's main switch on. - Set AUTO TV ON to ON in the menu settings. - Point the infrared rays emitter at the TV's remote sensor. •You can switch the video - Sony GV-D200 | Operating Instructions - Page 18
that you do not mix pictures recorded in the Hi8/standard 8 with the Digital8 system on a tape. •If you use fast-forward or slow-playback mode on the other (playback) VCR, the image being recorded may fluctuate. When you record from the other (playback) VCR, be sure to play back the original tape at - Sony GV-D200 | Operating Instructions - Page 19
Basic Operations Recording from the other VCR or TV Using the i.LINK cable (DV connecting cable) Simply connect the i.LINK cable (DV connecting cable) (not supplied) to the DV IN/ OUT or DV IN/OUT jack of the DV products. With digital-to-digital connection, video and audio signals are transmitted - Sony GV-D200 | Operating Instructions - Page 20
only for tapes recorded in the Digital8 system. •You cannot process externally input scenes using the PB ZOOM function. •You cannot record pictures that you have processed using the PB ZOOM function with your VCR. To record pictures that you have processed using the PB ZOOM function, record the - Sony GV-D200 | Operating Instructions - Page 21
digitally process playback images to obtain special effects like those in films or on TV. NEG. ART [a] : The colors and brightness of the image are reversed. SEPIA : The image is sepia. B&W : The image MENU VCR SET P EFFECT HiFi SOUND TBC DNR AUDIO MIX PB MODE A/V DV OUT [MENU] : END 2,3 VCR - Sony GV-D200 | Operating Instructions - Page 22
picture effect function works only for tapes recorded in the Digital8 system. •You cannot process externally input scenes using the picture effect function. •You cannot record pictures that you have processed using the picture effect function with your VCR. To record pictures that you have processed - Sony GV-D200 | Operating Instructions - Page 23
effect You can add special effects on playback images using the various digital functions. STILL You can play back a still image so that it is superimposed on a moving image. FLASH (FLASH MOTION) You can play back still images successively at constant intervals. LUMI. (LUMINANCEKEY) You can mask - Sony GV-D200 | Operating Instructions - Page 24
The color scheme of the area in the still image which is to be masked with a moving image TRAIL - The vanishing time of the incidental image When the number of bars on the monitor screen getting bigger, the digital effect will be getting bigger. 1 DIGITAL EFFECT 2 LUMI. 3 LUMI. 4 To cancel the - Sony GV-D200 | Operating Instructions - Page 25
recorded in the Digital8 system. • You cannot process externally input scenes using the digital effect function. • You cannot record images that you have processed using the digital effect function with your VCR. To record images that you have processed using the digital effect function, record - Sony GV-D200 | Operating Instructions - Page 26
Your VCR goes forward or backward to stop automatically at a desired scene having a counter value of "0:00:00". Use the Remote Commander supplied with a Sony digital video camera recorder for this operation. For details, refer to the operating instructions of the digital video camera recorder. Use - Sony GV-D200 | Operating Instructions - Page 27
changes and start playback from that point (Date search). Use the Remote Commander supplied with a Sony digital video camera recorder for this operation. For details, refer to the operating instructions of the digital video camera recorder. Use this function to check where recording dates change or - Sony GV-D200 | Operating Instructions - Page 28
for five seconds automatically (photo scan). Use the Remote Commander supplied with a Sony digital video camera recorder for these operations. For details, refer to the operating instructions of a Sony digital video camera recorder. Use these functions to check the still images or to edit only still - Sony GV-D200 | Operating Instructions - Page 29
search/Photo scan Scanning photo (1) Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan indicator appears. The indicator changes search and photo scan functions work only for tapes recorded in the Digital8 system. If a tape has a blank portion between recorded portions The - Sony GV-D200 | Operating Instructions - Page 30
/ time. Also, when you play back tapes recorded by a Digital8 system video camera recorder with the data code function, you can check the recording date/time and various settings when you have recorded. Using the data code function Your VCR automatically stores the date/time and the recording data - Sony GV-D200 | Operating Instructions - Page 31
Superimposing a title You can select one of eight preset titles and two custom titles (p. 33). You can also select the language, color, size, and position of titles. VACATION Advanced Operations (1) Press TITLE to display the title menu. (2) Turn the SEL/PUSH EXEC dial to select , then press the - Sony GV-D200 | Operating Instructions - Page 32
. However, the title is not recorded on the tape. You can record a title when you dub a tape by connecting your VCR to the other VCR with the A/V connecting cable. If you use the i.LINK cable (DV connecting cable) (not supplied) instead of the A/V connecting cable, you cannot record the title. 32 - Sony GV-D200 | Operating Instructions - Page 33
Advanced Operations Making your own titles You can make up to two titles and store them in your VCR. Each title can have up to 20 characters. (1) Press TITLE. (2) Turn the SEL/PUSH EXEC dial to select , then press the dial. (3) Turn the SEL/ - Sony GV-D200 | Operating Instructions - Page 34
Making your own titles To change a title you have stored In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then press the dial to delete the title. The last character is erased. Enter the - Sony GV-D200 | Operating Instructions - Page 35
CODE You can edit on VCRs that support the following systems: 8 mm, Hi8, VHS, S-VHS, VHSC, S-VHSC, Betamax, ED Betamax, mini DV, DV, or Digital8 If the other (recording) VCR is a monaural type Connect the yellow plug of the A/V connecting cable to the video input jack and the white plug - Sony GV-D200 | Operating Instructions - Page 36
are not recorded in the Digital8 system The picture may fluctuate. This is not a malfunction. During playback of tapes recorded in the Hi8/standard 8 system Digital signals are output as the image signals from the DV IN/OUT jack. You can connect one VCR only using the i.LINK cable (DV connecting - Sony GV-D200 | Operating Instructions - Page 37
only for tapes recorded in the Digital8 system. •You cannot dub the display indicators. •When you edit a digital video, the operation signals cannot be sent with LANC. •When you confirm the set-up video screen, connect your (playing) VCR to a TV, or a monitor using the super laser link function - Sony GV-D200 | Operating Instructions - Page 38
SETUP code (1) Set the POWER switch to ON on your (playback) VCR. (2) Turn the power of the other (recording) VCR on, then set the input selector to LINE. When you connect a digital video camera recorder, set its POWER switch to VCR/VTR. (3) Press MENU to display the menu settings. (4) Turn the SEL - Sony GV-D200 | Operating Instructions - Page 39
Editing Dubbing only desired scenes - Digital program editing About the IR SETUP code The IR SETUP code is stored in the memory of your VCR. Be sure to set the correct code, depending on the other (recording) VCR. The default setting is code number 3. Brand Sony Admiral (M. Wards) Aiwa Audio - Sony GV-D200 | Operating Instructions - Page 40
" if the button to cancel recording pause is N. Setting your (playback) VCR and the other (recording) VCR to face each other Locate the infrared rays emitter of your (playback) VCR to face it towards the remote sensor of the other (recording) VCR. Set the devices more than 12 in. (30 cm) apart, and - Sony GV-D200 | Operating Instructions - Page 41
. If the other (recording) VCR does not operate correctly •Set the IR SETUP code, or select the button to cancel the recording pause on the other (recording) VCR. •Place your (playback) VCR at least 12 in. (30 cm) away from the other (recording) VCR. •Refer to the operating instructions of the other - Sony GV-D200 | Operating Instructions - Page 42
below. (1) Set the POWER switch to ON on your (playback) VCR . (2) Turn the power of the other (recording) VCR on, then set the input selector to DV input. When you connect a digital video camera recorder, set its POWER switch to VCR/VTR. (3) Press MENU to display the menu settings. (4) Turn the SEL - Sony GV-D200 | Operating Instructions - Page 43
Digital program editing Step 3: Adjusting the synchronicity of the other (recording) VCR You can adjust the synchronicity of your (playback) VCR and the other (recording) VCR. First, eject the tape from your (playback) VCR IN and OUT are recorded on the image for five times each to calculate the - Sony GV-D200 | Operating Instructions - Page 44
Dubbing only desired scenes - Digital program editing 6 2,3 OTHERS ED I T SET CONTROL ADJ TEST RETURN CUT - I N allow about 10 seconds' lead before starting the recording. •When you complete step 3, the image to adjust the syncronicity is recorded for about 50 seconds. When you connect with the - Sony GV-D200 | Operating Instructions - Page 45
Digital program editing Operation 1: Making the program (1) Insert the tape for playback into your (playback) VCR, and insert a tape for recording into the other (recording) VCR end of the first scene you want to insert using the video operation buttons, then press X to suspend playback momentarily - Sony GV-D200 | Operating Instructions - Page 46
You cannot set IN and OUT when •You use a tape that is recorded in other than Digital8 system. •The tape has a blank portion. The total following procedure is not necessary. When you use a digital video camera recorder, set its POWER switch to VCR/VTR. (1) Select VIDEO EDIT in in the menu settings. - Sony GV-D200 | Operating Instructions - Page 47
software which you use. For details on how to capture images, refer to the instruction manual of your personal computer and software. S video cable (not supplied) AUDIO/VIDEO INPUT DV IN/OUT Editing OUT S VIDEO VIDEO AUDIO S VIDEO IN i.LINK DV IN/OUT Other VCR : Signal flow A/V connecting - Sony GV-D200 | Operating Instructions - Page 48
onto your originally recorded tape by specifying the insert start and end points. Use the Remote Commander supplied with a Sony digital camera recorder for this operation. Connections are the same as in "Recording from the other VCR or TV" on page 18 and 19. Insert a cassette containing the desired - Sony GV-D200 | Operating Instructions - Page 49
Then press X to set your (recording) VCR to the playback pause mode. (4) Press ZERO SET MEMORY on the Remote Commander. The ZERO SET MEMORY indicator flashes and zero set memory function works only for tapes recorded in the Digital8 system. •The picture and sound recorded on the section between the - Sony GV-D200 | Operating Instructions - Page 50
disappear Press MENU again. VCR SET P EFFECT HiFi SOUND TBC DNR OTHERS AUDIOWMOIXRLD T I ME NTSC PBBEEP PB MODCOEMMANDER A/V DVVIODEUOT EDIT [MENU] E: DENITDSET OTHERS WORLD T I ME BEEP COMMANDER VIDEO EDIT EDIT SET RETURN 0 HR MANUAL SET WORLD T I ME BEEP COMMANDER VIDEO EDIT EDIT SET RETURN - Sony GV-D200 | Operating Instructions - Page 51
following icons: VCR SET TAPE images The colors and brightness of the image are reversed The image is sepia The image is monochrome (black-and-white) The light intensity is clearer, and the image stands for "Digital Noise Reduction." * When you play back tapes recorded in the Hi8/standard 8 system - Sony GV-D200 | Operating Instructions - Page 52
(Hi8/standard 8 or Digital8 ) that was used to record on the tape, and play back the tape To play back a tape that was recorded in the Hi8/ standard 8 system when your VCR does not automatically distinguish the recording system To convert digital video signals into analog video signals via your VCR - Sony GV-D200 | Operating Instructions - Page 53
menu settings. In this case, the indicator "8mm TAPE t SP REC, Hi8 TAPE t LP/SP REC" appears on the monitor screen. Use Hi8 tapes for the LP mode. Notes on the LP mode •When you record a tape in the LP mode on your VCR, we recommend playing the tape on your VCR. When you play back the tape on - Sony GV-D200 | Operating Instructions - Page 54
To automatically turn on the Sony TV when using the super laser link function To switch the video input on a Sony TV when using the super laser link your VCR with a Remote Commander supplied with a Sony video camera recorder To activate your VCR with a Remote Commander supplied with a Sony product. - Sony GV-D200 | Operating Instructions - Page 55
use your VCR for about six months, the date and time settings may be deleted because the vanadium-lithium battery installed in your VCR will have been discharged. Charge the battery MENU to make the menu settings disappear. 1,7 MENU 2 3 VCR SET P EFFECT HiFi SOUND TBC DNR AUDIO MIX PB MODE A/V - Sony GV-D200 | Operating Instructions - Page 56
not set the date and time is recorded on the data code of the tape. Note on the time indicator The internal clock of your VCR operates on a 12-hour cycle. • 12:00 AM stands for midnight. • 12:00 PM stands for noon. 56 - Sony GV-D200 | Operating Instructions - Page 57
when you use your Digital8 system VCR on Hi8 /standard 8 tape is half the recording time of the conventional Hi8 /standard 8 system VCR. (120 minutes of recording time becomes 60 minutes in the SP mode.) * If you use standard 8 tape, be sure to play back the tape on your VCR (the GV- D200). Mosaic - Sony GV-D200 | Operating Instructions - Page 58
a dual sound track tape When you use tapes recorded in the Digital8 system When you play back a Digital8 system tape which is dubbed from a tape Main sound and sub sound Main sound Sub sound When you use a tape recorded in the Hi8/standard 8 system When you play back a dual sound track tape VCR. 58 - Sony GV-D200 | Operating Instructions - Page 59
LINK is a digital serial interface for handling digital video, digital audio and other 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 baud rate is listed under "Specifications" in the instruction manual of each equipment. It is also indicated near - Sony GV-D200 | Operating Instructions - Page 60
, make sure that application software supported by this unit is already installed on the personal computer. For details on precautions when connecting this unit, also refer to the instruction manuals for the equipment to be connected. Required i.LINK Cable Use the Sony i.LINK 4-pin-to-4-pin cable - Sony GV-D200 | Operating Instructions - Page 61
If you run into any problem using your VCR, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or a local authorized Sony service facility. If "C:ss:ss" appears on the monitor screen, the self-diagnosis - Sony GV-D200 | Operating Instructions - Page 62
program again on a recorded portion (p. 45). • Your (recording) VCR and the other (playback) VCR are not synchronized. c Adjust the synchronicity (p. 43). The Remote Commander supplied with a Sony digital video camera recorder does not work. •The remote control code is not set correctly or set to - Sony GV-D200 | Operating Instructions - Page 63
diagnosis display •C:ss:ss You can service your VCR yourself. •E:ss:ss Contact your Sony dealer or a local authorized Sony facility. Five-digit display C:04:ss C:21:ss C:22:ss C:31:ss C:32:ss E:61:ss E:62:ss Cause and/or Corrective Actions • You are using a battery pack that is not an "InfoLITHIUM - Sony GV-D200 | Operating Instructions - Page 64
flashes green. : The CAUTION lamp flashes yellow. 1 2 3 3min Slow flashing Fast flashing 4 5 NO TAPE TAPE END 6 C:21:00 7 8 CLEANING CASSETTE CLOCK SET q; FOR "Info LITHIUM" BATTERY ONLY qa COPY INHIBIT 9 C:31:00 qs 8mm TAPE SP REC H i 8 TAPE LP/SP REC 1 The battery is weak or dead - Sony GV-D200 | Operating Instructions - Page 65
source and contact your Sony dealer or a local authorized facility. 0 The battery is not the "InfoLITHIUM" type. qa You cannot dub the recordings. You tried to record a picture that has a copyright control signal (p. 57). qs You cannot record in the LP mode. Use Hi8 /Digital8 tapes when you record - Sony GV-D200 | Operating Instructions - Page 66
/L10B/L10C [a] [b] Your VCR is an NTSC system based VCR. If you want to view the playback picture on your TV, it must be an NTSC system based TV with a AUDIO/VIDEO input jack. The following shows TV color systems used overseas. NTSC system Bahama Islands, Bolivia, Canada, Central America, Chile - Sony GV-D200 | Operating Instructions - Page 67
from a ski slope into a place warmed up by a heating device. - You bring your VCR from an air-conditioned car or room into a hot place outside. - You use your VCR after a squall or a shower. - You use your VCR in a high temperature and humid place. How to prevent moisture condensation When you bring - Sony GV-D200 | Operating Instructions - Page 68
you play back in the Hi8/standard 8 (analog) system The video head may be dirty if - playback pictures contain noise. - playback pictures are hardly visible. - playback pictures do not appear. or If the above problem occurs, clean the video heads with a Sony V8-25CLD cleaning cassette (not supplied - Sony GV-D200 | Operating Instructions - Page 69
operation •Operate your VCR on 7.2 V (battery pack) or 8.4 V (AC power adaptor). •For DC or AC operation, use the accessories recommended in this operating instructions. •If any solid object or liquid gets inside the casing, unplug your VCR and have it checked by a Sony dealer before operating it - Sony GV-D200 | Operating Instructions - Page 70
, use a new Hi8 /Digital8 tape. •When you capture the pictures recorded in the Hi8 /standard 8 system to a personal computer, dub the recordings to the Digital or DV system first, then capture them to the personal computer. When inputting the image recorded by Hi8/standard 8 system into a Sony VAIO - Sony GV-D200 | Operating Instructions - Page 71
Hi8 /Digital8 video cassette Recording/playback time (using 120 min. Hi8 video cassette) SP mode: 1 hour LP mode: 1 hour and 30 minuites Fastforward/rewind time (using 120 min. Hi8 video 7.2 V (battery pack) 8.4 V (AC power adaptor) Average power consumption (when using the battery pack) 3.0 - Sony GV-D200 | Operating Instructions - Page 72
indicated as control L or REMOTE. qs Jack cover (p. 7) qd AUDIO/VIDEO INPUT jack (p. 18, 47) 8 MENU button (p. 50) 9 POWER switch (p. 13) This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase - Sony GV-D200 | Operating Instructions - Page 73
CAUTION DIGITAL EFFECT TITLE PB ZOOM REC PAUSE SLOW 2 PLAY REW STOP FF ws wd wf wg wh wj wk wl e; ea es ed ef qf DISPLAY button (p. 13) qg DATA CODE button (p. 30) qh CAUTION VIDEO/AUDIO L/R OUT jacks (p. 7, 18, 35, 47) es RFU DC OUT jack (P. 7) ed S VIDEO OUT jack (p. 7, 35) ef S VIDEO - Sony GV-D200 | Operating Instructions - Page 74
eg DC IN jack (p. 8, 10) eh Infrared rays emitter (p. 17, 40) ej Battery mounting surface (p. 9) ek Hooks for shoulder strap el RELEASE knob r; DV IN/OUT jack supplied) to your VCR, slide up the RELEASE knob and release the terminal cover. After using a TV tuner, attach the terminal cover to your - Sony GV-D200 | Operating Instructions - Page 75
SP STILL NEG.ART VOL 0:00:00:00 ZERO SET MEMORY DATE 01 SEARCH DV IN 16BIT 1 Recording mode indicator (p. 53) 2 Format indicator (p. 57) , or indicator appears. 3 Remaining battery time indicator 4 Picture effect indicator (p. 21)/Digital for scenes easily. Your VCR records the time code during - Sony GV-D200 | Operating Instructions - Page 76
BEEP 54, 64 C Charging battery 10 Clock set 55 Connection (viewing on TV 7 (dubbing a tape 35 Connection to your personal computer 47 D, E Data code 30, 53 Date search 27 DC IN jack 8, 10 DEMO MODE 54 DIGITAL EFFECT 23 Digital 8 system 57 Digital program editing ......... 37 DISPLAY 13
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
©2000 Sony Corporation
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom.
Record
the serial number in the space provided below.
Refer to these
numbers whenever you call upon your Sony dealer regarding this
product.
3-064-178-
11
(1)
Digital
Video Cassette
Recorder
Model No.
GV-D200
Serial No.
Model No.
AC–
Serial No.
GV-D200