Sony HCD-BC250 Operating Instructions - Page 58
To use a digital satellite, receiver or other components, with a high audio output level
View all Sony HCD-BC250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
To use a digital satellite receiver or other components with a high audio output level Connect the satellite receiver to the VIDEO/ SAT jacks of this system. You can also connect the components with a high audio output level (including 2V r.m.s components, such as MD, etc.) to the VIDEO/SAT jacks, and perform the following to prevent distortion occurring. FUNCTION 1 2 3 4 5 6 7 8 9 10 0 6 Press ENTER or AMP MENU. Turns off the AMP menu. The function name in the front panel display changes to "SAT." Tip To return to the VIDEO function, select "ATT OFF" at step 5. C/X/x/c AMP MENU ENTER 1 Press FUNCTION repeatedly until VIDEO appears in the front panel display. 2 Press AMP MENU. 3 Press X or x until "CUSTOMIZE" appears in the front panel display, then press ENTER or c. The system enters the Customize Menu mode. 4 Press X or x repeatedly to select "ATTENUATE" in the front panel display, then press ENTER or c. 5 Press X or x to select "ATT ON" in the front panel display. The output level is changed. When you select "ATT OFF" and press x, this operation will be cancelled. 58GB