Sony HCD-CZ1 NASCZ1 Instructions (main component system) - Page 25
Manual tuning preset, Tuner
View all Sony HCD-CZ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Manual tuning preset You can manually tune in and store the radio frequency of the desired stations. 1 Press TUNER BAND repeatedly to select "FM" or "AM". 2 Press TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display. 3 Press TUNING + or - repeatedly to tune in the desired station. 4 Press TUNER MEMORY. 5 Press TUNING + or - repeatedly to select the desired preset number. 6 Press ENTER. 7 Repeat steps 1 through 6 to store other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in "Manual tuning preset" (page 25). Set another station to the existing preset number After step 4, press TUNING + or - repeatedly to select the preset number you want to store the station. To change the AM tuning interval (except for European model) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding FUNCTION on the system, press ?/1 on the system. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Tips • The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. Tuner 25GB