Sony HCD-EC619iP Operating Instructions - Page 29
Specifications, Main unit
View all Sony HCD-EC619iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
On the speaker system This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. Specifications Main unit AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (The United States model only) With 8 ohms loads, both channels driven, from 120 10,000 Hz; rated 26 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output. Amplifier section U.S. model: Output power (reference): 60 W + 60 W (per channel at 8 ohms, 1 kHz) Other models: Power output (rated): 30 W + 30 W (at 8 ohms, 1 kHz, 1% THD) Output power (reference): 60 W + 60 W (per channel at 8 ohms, 1 kHz) Outputs SPEAKERS: Accepts impedance of 8 ohms CD player section System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Tuner section FM stereo, FM superheterodyne tuner Antenna: FM lead antenna Tuning range: North American model: 87.5 MHz 108.0 MHz (100 kHz step) Other models: 87.5 MHz 108.0 MHz (50 kHz step) Additional Information 29GB