Sony HCD-FL7D Operating Instructions - Page 31
Adjusting the speaker volume, and level
View all Sony HCD-FL7D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
DVD/VIDEO CD/CD/Super Audio CD/MP3 x BALANCE You can vary the balance of the left and right speakers as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. • FRONT (CENTER): Adjust the balance between the front left and right speakers (You can adjust in 6 steps to left or right from center position). • REAR (CENTER): Adjust the balance between the rear left and right speakers (You can adjust in 6 steps to left or right from center position). x LEVEL You can vary the level of each speakers as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. • CENTER (0 dB): Adjust the level of the center speaker (-6 dB to +6 dB, 1 dB steps). • REAR (0 dB): Adjust the level of the rear speakers (-6 dB to +6 dB, 1 dB steps). • SUBWOOFER (0 dB): Adjust the level of the subwoofer (-6 dB to +6 dB, 1 dB steps). x TEST TONE The speakers will emit a test tone to adjust "BALANCE" and "LEVEL". • OFF: The test tone is not emitted from the speakers. • ON: The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the "SPEAKER SETUP" items, the test tone is emitted from both left and right speakers simultaneously. To adjust the volume of all the speakers at once Turn VOLUME (or press VOLUME +/- on the remote). Adjusting the speaker volume and level 1 Press DVD SETUP in stop mode, then select "SPEAKER SETUP". 2 Select "TEST TONE" and set "TEST TONE" to "ON". You will hear the test tone from each speaker in sequence. 3 From your listening position, select "BALANCE" or "LEVEL", then press B or b repeatedly to adjust the value of "BALANCE", or press V or v repeatedly to adjust the value of "LEVEL". The test tone is emitted from both left and right speakers simultaneously. 4 Select "TEST TONE" and set "TEST TONE" to "OFF" to turn off the test tone. Notes • When you adjust the speaker settings, the sound cuts off for a moment. • If you adjust these parameters using OSD while adjusting the speaker parameters using AMP MENU or SPEAKER LEVEL (pages 14-16), the display on the unit turns off. 31GB