Sony HCD-GS100 Operating Instructions - Page 30

Specifications, POWER OUTPUT AND TOTAL - remote control

Page 30 highlights

Specifications Amplifier section U.S.A. model: AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 6 ohms loads both channels driven, from 120 - 10,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Continuous RMS power output 50 + 50 watts (6 ohms at 1 kHz, 10% THD) Total harmonic distortion less than 0.09% (6 ohms at 1 kHz, 30 watts) Inputs VIDEO (MD) (phono jacks): voltage 250 mV/450 mV, impedance 47 kilohms Outputs PHONES (stereo phone jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 to 16 ohms CD player section System Laser Frequency response Wavelength Signal-to-noise ratio Dynamic range Compact disc and digital audio system Semiconductor laser (λ = 780 nm) Emission duration: continuous 2 Hz - 20 kHz (±0.5 dB) 780 - 790 nm More than 90 dB More than 90 dB Tape player section Recording system Frequency response Wow and flutter 4-track 2-channel stereo 40 - 13,000 Hz (±3 dB), using Sony TYPE I cassette ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz FM lead antenna 75 ohms unbalanced 10.7 MHz AM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 530 - 1,710 kHz (with the interval set at 10 kHz) 531 - 1,710 kHz (with the interval set at 9 kHz) AM loop antenna External antenna terminal 450 kHz Speaker Speaker system Speaker units Woofer: Tweeter: Super Tweeter: Nominal impedance Dimensions (w/h/d) Mass 3-way, bass-reflex type 13 cm, cone type 5 cm, cone type 2 cm, dome type 6 ohms Approx. 210 × 325 × 241 mm Approx. 2.8 kg net per speaker General Power requirements: 120 V AC, 60 Hz Power consumption: 100 watts Dimensions (w/h/d) incl. projecting parts and controls: Approx. 280 × 325 × 465 mm Mass : Approx. 8.8 kg Supplied accessories: Remote commander (1) Batteries (2) AM loop antenna (1) FM lead antenna (1) Design and specifications are subject to change without notice. 30US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

30
US
Specifications
Amplifier section
U.S.A. model:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohms loads both channels driven, from
120 – 10,000 Hz; rated 50 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Continuous RMS power output
50 + 50 watts
(6 ohms at 1 kHz,
10% THD)
Total harmonic distortion
less than 0.09%
(6 ohms at 1 kHz,
30 watts)
Inputs
VIDEO (MD) (phono jacks):
voltage 250 mV/450 mV,
impedance 47 kilohms
Outputs
PHONES (stereo phone jack):
accepts headphones of
8 ohms or more
SPEAKER:
accepts impedance of 6 to
16 ohms
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
= 780 nm)
Emission duration:
continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Wavelength
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency
450 kHz
Speaker
Speaker system
3-way, bass-reflex type
Speaker units
Woofer:
13 cm, cone type
Tweeter:
5 cm, cone type
Super Tweeter:
2 cm, dome type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 210
×
325
×
241 mm
Mass
Approx. 2.8 kg net per
speaker
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
100 watts
Dimensions (w/h/d) incl. projecting parts and
controls:
Approx. 280
×
325
×
465 mm
Mass :
Approx. 8.8 kg
Supplied accessories:
Remote commander (1)
Batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Design and specifications are subject to change
without notice.