Sony HCD-GX9000 MHCGX9000 Instructions (Main Stereo System) - Page 17

Tuner 7 Repeat steps 1 to 6 to store other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in "Manual tuning preset". Set another station Start over from step 1. to the existing preset number To improve tuner reception When tuner reception is poor, set the CD power manage function to "CD POWER OFF". The default setting is "CD POWER ON". Use buttons on the system for the operation. 1 Press CD. 2 Press ?/1 to turn off the system. 3 Press ?/1 while holding x. "CD POWER OFF" appears in the display. To set CD power on Repeat the procedure above and "CD POWER ON" appears in the display. Notes • When "CD POWER OFF" is selected, CD access time is increased. • You cannot change the CD power management setting in the Power Saving Mode (page 29). To change the AM tuning interval (except for Middle Eastern models) Use buttons on the system for the operation. The factory settings for AM tuning interval is 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding down ENTER, press ?/1. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in the Power Saving Mode (page 29). Tips • The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. • If you press TUNER/BAND while the power is off, the power turns on automatically and TUNER is selected as a function. • To improve the reception, adjust the supplied antennas or connect an external antenna. • You can also press FUNCTION repeatedly on the remote to select "TUNER". 17GB