Sony HCD-HDX267W Operating Instructions - Page 19
Installing the Speakers on a Wall, Getting Started - ADVANCED
View all Sony HCD-HDX267W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started - ADVANCED - Installing the Speakers on a Wall You can use the speakers by installing on the wall. Installing the speakers on a wall 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. 4 mm (5/32 inch) 30 mm (1 3/16 inches) For the other speakers 6 to 9 mm (1/4 to 3/8 inch) 3 Hang the speakers on the screws. 4.6 mm (3/16 inch) 10 mm (13/32 inch) 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hole on the back of the speaker 2 Fasten the screws to the wall. For the center speaker 160 mm (6 5/16 inches) 7 to 9 mm (9/32 to 3/8 inch) Rear of speaker Note • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 19GB