Home » Sony Manuals » Home Theater Systems » Sony HCD-HDX500 » Manual Viewer

Sony HCD-HDX500 Operating Instructions - Page 26

To quit the Quick Setup, To recall the Quick Setup display, Press

Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Getting Started - BASIC - 12 Press . AUTO CALIBRATION Connect calibration mic. Start measurement? YES NO Auto Calibration starts. Note • Loud test sound is output when [AUTO CALIBRATION] starts. You cannot turn the volume down. Give consideration to children and neighbor. • Avoid being in the measurement area and making noise during the measurement (which takes about 1 minute), as it may interfere with measurement. 13 Unplug the calibration mic and press C/ c to select [YES]. Measurement complete. FRONT L : 16ft 4.87m 0.0dB FRONT R : 16ft 4.87m 0.0dB CENTER : 16ft 4.87m + 1.0dB SUBWOOFER : 16ft 4.87m + 4.0dB SURROUND L : 10ft 3.04m - 2.0dB SURROUND R : 10ft 3.04m - 2.0dB If OK, unplug calibration mic and select "YES". YES NO Tip • If you change the position of the speakers, reset the speaker settings. See "Getting Optimal Surround Sound for a Room" (page 82) and "Calibrating the Appropriate Settings Automatically" (page 84). • If you want to change any of the settings, see "Using the Setup Display" (page 86). To recall the Quick Setup display 1 Press DISPLAY when the system is in stop mode. The Control Menu display appears. 2 Press X/x to select press . [SETUP], then The options for [SETUP] appear. 1 2 ( 2 7 ) 1 8 ( 3 4 ) T 0:00:02 DVD VIDEO QUICK QUICK CUSTOM RESET BNR 3 Press X/x to select [QUICK], then press . The Quick Setup display appears. Note • The environment of the room in which the system is installed may affect measurements. • If measurement fails, follow the message then retry [AUTO CALIBRATION]. • When you select [SECOND ROOM] for [SPEAKER FORMATION], measurement of [SURROUND L] and [SURROUND R] is not displayed. 14 Press . Quick Setup is finished. All connections and setup operations are complete. To quit the Quick Setup Press DISPLAY in any Step. 26US

Section	Page
WARNING	2
Welcome!	3
About This Manual	6
This System Can Play the Following Discs	6
Note about CDs/DVDs	6
Example of discs that the system cannot play	7
About Multi Session CD	7
Region code	8
Note about playback operations of DVDs and VIDEO CDs	8
Copyrights	8
Getting Started - BASIC -	9
Step 1: Assembling the Speakers	10
Step 2: Connecting the System and TV	19
1 Connecting the Speakers	21
2 Connecting the TV	22
3 Connecting the Antenna (Aerial)	22
4 Connecting the AC power cord (mains lead)	23
Step 3: Positioning the System	24
Positioning the speakers	24
Step 4: Performing the Quick Setup	24
Getting Started - ADVANCED -	27
Turning off the Demonstration	27
Setting the demonstration mode to on/off	27
Installing the Speakers on a Wall	28
Installing the speakers on a wall	28
Connecting the TV (Advanced)	30
Does your TV accept progressive signals?	32
Connecting Other Components	34
Basic Operations	37
Playing Discs	37
About DVD 5-DISC changer	38
Enjoying the Radio or Other Components	39
Selecting the connected component	39
Changing the input level of the sound from connected components	39
Enjoying TV or VCR Sound from All Speakers	40
Selecting the Movie or Music Mode	41
Sound Adjustments	42
Enjoying Surround Sound by Using Sound Field	42
Automatic outputting of the original sound	42
Outputting the sound from multiple speakers	42
Outputting 2 channel sources like CDs by 5.1channel	42
Outputting XM radio signals in the multi channel surround format	43
Enjoying Digital Cinema Sound	43
Using only the front speaker and subwoofer	44
Enjoying the surround sound by headphones	44
Enjoying Multiplex Broadcast Sound	44
Various Functions for Playing Discs	45
Searching for a Particular Point on a Disc	45
Locating a point quickly by playing a disc in fast forward or fast reverse (Scan)	45
Watching frame by frame (Slow-motion Play)	45
Playing one frame at a time (Freeze Frame)	45
Searching for a Title/ Chapter/Track/Scene, etc.	46
Searching by Scene	47
Resuming Playback from the Point Where You Stopped the Disc	47
Creating Your Own Program	48
Playing in Random Order	50
Playing Repeatedly	51
Using the DVD’s Menu	52
Changing the Sound	52
Checking the audio signal format	53
Selecting [ORIGINAL] or [PLAY LIST] on a DVD-R/ DVD-RW	54
Viewing Information About the Disc	54
Viewing the playing time and remaining time in the front panel display	54
Checking the playing time and remaining time	55
Checking the play information of the disc	55
Checking the date information	56
Changing the Angles	56
Displaying the Subtitles	57
Adjusting the Delay Between the Picture and Sound	57
About MP3 Audio Tracks and JPEG Image Files	58
What is MP3/JPEG?	58
Discs that the system can play	58
MP3 audio track or JPEG image file that the system can play	58
Playback order of MP3 audio tracks or JPEG image files	59
Playing DATA CDs or DATA DVDs with MP3 Audio Tracks and JPEG Image Files	60
Selecting an MP3 audio track or album	60
Selecting a JPEG image file or album	60
Playing Audio Tracks and Images as a Slide Show with Sound	62
Specifying the slide show duration	62
Selecting an effect for image files in the slide show	63
Playing VIDEO CDs with PBC Functions (Ver.2.0)	64
Tuner Functions	65
Presetting Radio Stations	65
Listening to the Radio	66
Naming preset stations	66
Viewing the station name or frequency in the front panel display	67
Listening to the XM Radio	67
Connecting the XM Radio	68
Checking the XM Radio ID	68
Receiving XM Radio broadcasts	68
Selecting channels from a category (Category Tuning)	68
Selecting channels by inputting the channel number directly (Direct Tuning)	69
Displaying the XM Radio information in the front panel display	69
Presetting XM Radio Channels	70
Presetting channels	70
Selecting the channel by using the preset numbers	70
Other Operations	72
Controlling the TV with the Supplied Remote	72
Controlling TVs with the remote	72
Using the THEATRE SYNC Function	73
Preparing for the THEATRE SYNC function	73
Operating the THEATRE SYNC function	74
Using the Sound Effect	75
Reinforcing bass frequencies	75
Using the Sleep Timer	75
Changing the Brightness of the Front Panel Display	76
Using the DIGITAL MEDIA PORT Adapter	77
Playing the connected component on the system	77
Deactivating the Buttons on the Unit	78
Advanced Settings and Adjustments	79
Locking Discs	79
Preventing playback of specific discs [CUSTOM PARENTAL CONTROL]	79
Limiting playback for children [PARENTAL CONTROL]	80
Changing the password	82
Getting Optimal Surround Sound for a Room	82
Calibrating the Appropriate Settings Automatically	84
Using the Setup Display	86
Setting the Display or Sound Track Language	88
Settings for the Display	88
Custom Settings	90
Settings for the Speakers	92
Adjusting the speaker level by using the test tone	93
Returning to the Default Settings	94
Additional Information	95
Precautions	95
Notes about the Discs	96
Troubleshooting	96
Self-diagnosis Function	100
Specifications	101
Glossary	103
Language Code List	107
Parental Control Area Code List	107
Index to Parts and Controls	108
Front panel	108
Rear panel	109
Front panel display	110
Guide to the Control Menu Display	111
Control Menu display	111
DVD Setup Display List	114
System Menu List	115
Index	116

Match case Limit results 1 per page

Getting Started – BASIC –

Press

Auto Calibration starts.

Note

• Loud test sound is output when [AUTO

CALIBRATION] starts. You cannot turn the

volume down. Give consideration to children

and neighbor.

• Avoid being in the measurement area and

making noise during the measurement (which

takes about 1 minute), as it may interfere with

measurement.

Unplug the calibration mic and press

to select [YES].

Note

• The environment of the room in which the

system is installed may affect measurements.

• If measurement fails, follow the message then

retry [AUTO CALIBRATION].

• When you select [SECOND ROOM] for

[SPEAKER FORMATION], measurement of

[SURROUND L] and [SURROUND R] is not

displayed.

Press

Quick Setup is finished. All connections

and setup operations are complete.

To quit the Quick Setup

Press

DISPLAY in any Step.

Tip

• If you change the position of the speakers, reset the

speaker settings. See “Getting Optimal Surround

Sound for a Room” (page 82) and “Calibrating the

Appropriate Settings Automatically” (page 84).

• If you want to change any of the settings, see “Using

the Setup Display” (page 86).

To recall the Quick Setup display

Press

DISPLAY when the system is in

stop mode.

The Control Menu display appears.

Press

to select

[SETUP], then

press

The options for [SETUP] appear.

Press

to select [QUICK], then press

The Quick Setup display appears.

Connect calibration mic. Start

measurement?

YES

AUTO CALIBRATION

FRONT L :

FRONT R :

CENTER

SUBWOOFER :

SURROUND L :

SURROUND R :

If OK, unplug calibration mic and select

“YES”.

YES

16ft

4.87m

0.0dB

16ft

4.87m

0.0dB

16ft

4.87m

+ 1.0dB

16ft

4.87m

+ 4.0dB

10ft

3.04m

2.0dB

10ft

3.04m

2.0dB

Measurement complete.

1 2 ( 2 7 )

QUICK

RESET

DVD VIDEO

BNR

0 : 0 0 : 0 2

1 8 ( 3 4 )

CUSTOM