Sony HCD-U1BT Operating Instructions - Page 24

To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. Use buttons on the unit to reset the system to its factory default settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press DSGX  and at the same time. All user-configured settings, such as preset radio stations, timer, and the clock, are deleted. Messages CD/ATRAC/MP3 player, Tuner Complete!: The preset operation ended normally. LOCKED: The system does not eject the disc. Contact your nearest Sony dealer. No Disc: There is no disc in the system, or you have loaded a disc that cannot be played. No Step: All of the programmed tracks or files have been erased. Not in Use: You pressed an invalid button. OFF TIME NG!: The Play Timer start and end times are set to the same time. Over: You have reached the end of the disc while pressing   during playback or pause. Push SELECT!: You tried to set the clock or timer during timer operation. Push STOP!: You pressed PLAY MODE  during playback. Reading: The system is reading information of the disc. Some buttons are not available. SET CLOCK!: You tried to select the timer when the clock is not set. SET TIMER!: You tried to select the timer when the Play Timer is not set. Step Full!: You tried to program more than 26 tracks or files (steps). 24GB