Sony HCD-X10 Operating Instructions - Page 26
Connecting the video cord, DIGITAL IN COAXIAL jack of this unit
View all Sony HCD-X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Connecting the video cord To connect the VIDEO OUT jack of another component to the VIDEO IN or SAT/CABLE IN jack of this unit Connect a VCR or other component to the VIDEO IN or SAT/CABLE IN jack using a video/audio cord (not supplied). When connecting a cord, be sure to match the color-coded sleeve to the appropriate component jack. Yellow (Video) Note • The video signal that is input from the VIDEO IN or SAT/CABLE IN jack is output from the VIDEO (MONITOR OUT) jack only. Connecting the audio cords The quality of the audio increases from A to B, C. A To connect the AUDIO OUT jacks of other component to the AUDIO IN jacks of this unit Connect a VCR or other component to the AUDIO IN jacks using an video/audio cord (not supplied). When connecting the cords, be sure to match the color-coded sleeves to the appropriate component jacks. White (L/Audio) Red (R/Audio) B To connect the COAXIAL DIGITAL OUT jack of a component to the DIGITAL IN COAXIAL jack of this unit Connect the component to the DIGITAL IN COAXIAL jack using a coaxial digital cord (not supplied). C To connect the OPTICAL DIGITAL OUT jack of a component to the DIGITAL IN OPTICAL jack of this unit Connect the component to the DIGITAL IN OPTICAL jack using a optical digital cord (not supplied). Note • When you connect to the SAT/CABLE DIGITAL IN OPTICAL or COAXIAL jack, set the switch on the rear panel accordingly. DIGITAL IN OPTICAL COAXIAL SAT/ CABLE COAXIAL 26US