Sony HCD-ZX6 Operating Instructions - Page 20
— Program Edit, Recording to a tape manually, — Manual Recording
View all Sony HCD-ZX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Recording a disc by specifying track order - Program Edit You can record tracks from all the discs in the order you want. Between step 2 and step 3 of "CD Synchro Recording" (page 19), perform step 1 to 6 of "Creating your own program" (page 15). When programming, make sure the playing times for each side do not exceed the length of one side of the tape. Notes • You cannot use Tape Select Edit for discs containing over 20 tracks or MP3 audio tracks. • You cannot listen to other sources while recording. • Game Mixing does not function during CD Synchro Recording. Tip To check the required tape length for recording a disc, press EDIT after you have loaded a disc in CD function. The required tape length for the currently selected disc appears, followed by the total playing time for side A and side B respectively (Tape Select Edit). Recording to a tape manually - Manual Recording You can record just the portions you like from a disc, tape or radio program on a tape. You can also record from connected components. 1 Load a recordable tape into deck B. 2 Press FUNCTION or TUNER/BAND repeatedly (or press CD or press TAPE repeatedly on the remote) to select the recording source you want to record. 3 Load the disc or tape or tune to the station you want to record. To record from connected component, connect the external audio sources. 4 Press REC PAUSE/START. Deck B stands by for recording. REC PAUSE/START indicator flashes. If you want to record on the reverse side, press h (TAPE B). 5 Press DIRECTION repeatedly to select "g" to record on one side. Select "j" (or "RELAY") to record on both sides. 6 Press REC PAUSE/START, then start playing the source (for disc or tape). Recording starts. To stop recording Press x (TAPE B). 20GB