Sony HDR-AS200VR Help Guide - Page 31
About the REC HOLD lock switch
View all Sony HDR-AS200VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Press and hold the circled part to unlock, then slide it in the opposite direction of step 2. Note The flat adhesive mount and curved adhesive mount cannot be used again once they are detached from the location surface. When detaching, peel off slowly. If peeled off forcibly, the surface on which the mount is fixed might be damaged. Before attaching, check the surface of the item to be used. If it is dirty, or dust, moisture or oily substances are attached, adhesive strength may be impaired and the item could detach with slight impact. Use the appropriate adhesive mount (flat or curved) for the surface where the camera will be located. If the mount is not suitable for the surface, it may detach by slight impact. Thread a suitable leash through the leash attachment hole of the waterproof case, then attach the leash to an item you intend to use with the camera. Before use, confirm that the screw hole on the attachment buckle is not loose, and the flat or curved adhesive mount is securely attached to the surface. [18] How to use Shooting Shooting movies and still images About the REC HOLD (lock) switch The REC HOLD (lock) switch can prevent accidental operation. Slide the REC HOLD (lock) switch in the HOLD direction to lock the REC button. To release the lock, slide it in the opposite direction. Before recording, release the lock. If you lock the camera while recording, the recording state will be kept*. If you lock the camera after you stop recording, the stopped state will be kept*. * Release the lock to change the setting. FDR-X1000V