Sony HDR-AS200VR Help Guide - Page 61
Reset, Formt, Prset, Regen
View all Sony HDR-AS200VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
When selecting 30p or 60p 00:00:00:00 - 23:59:59:29 When selecting 25p or 50p 00:00:00:00 - 23:59:59:24 When selecting 24p, you can set the last 2 time code digits of the frames in multiples of 4, between 0 and 23. RESET: Initializes the time code. Press the ENTER button to display [SURE?] while [OK] is displayed, then press the ENTER button again. FORMT: Selects the time code recording method. DF: Records the time code in drop frame. NDF: Records the time code in non-drop frame. In the following situations, the time code is fixed to [NDF]. When [VMODE] is set to 24p When [V.SYS] is set to [PAL] RUN: Sets how the time code advances. REC: The time code advances only while recording XAVC S movies. It is recorded sequentially from the time code on the image recorded last time. FREE: The time code advances sequentially, regardless of the operation of the camera. MAKE: Sets the time code to be recorded. PrSet: The newly set-up time code is recorded on recording media. REGEN: The last time code of the previous recording is read out from the recording media and the new time code is recorded sequentially from the last time code.