Sony HDR-CX160 Handycam® Handbook - Page 87
the point that the recording movie is, point when START/STOP is pressed - hd flash memory camcorder
UPC - 027242820210
View all Sony HDR-CX160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table of Contents Enjoy Useful Functions Photos cannot be recorded. You cannot record photos together with: [Smth Slw REC] [Golf Shot] [ Fader] The camcorder cannot shoot photos while it is in the movie recording mode, depending on the [ REC Mode] or [ Frame Rate] selected. The access lamp remains lit or flashing even if recording was stopped. Your camcorder is recording the scene you have just shot on the memory card. The imaging field looks different. The imaging field may look different depending on the condition of your camcorder. This is not a malfunction. The actual recording time for movies is less than the expected recording time of the recording media. Depending on the recording conditions, the time available for recording may be shorter, for example when recording a fast moving object, etc. The camcorder stops operating. The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. If you keep applying vibration on the camcorder, recording may stop. There is a time difference between the point when START/STOP is pressed and the point that the recording movie is started or stopped actually. On your camcorder, there may be a slight time difference between the point where you press START/STOP and the actual point that recording movie starts/stops. This is not a malfunction. The horizontal to vertical ratio of the movie (16:9 (wide)/4:3) cannot be changed. The horizontal to vertical ratio of high definition image quality (HD) movies is 16:9 (wide). The auto focus does not function. Set [Focus] to [Auto] (p. 69). The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 69). SteadyShot does not function. Set [ SteadyShot] to [Active] or [Standard], [ SteadyShot] to [On] (p. 72). Even if [ SteadyShot] is set to [Active] or [Standard], [ SteadyShot] to [On], your camcorder may not be able to compensate for excessive vibrations. The subjects passing by the screen very fast appear crooked. This is called the focal plane phenomenon. This is not a malfunction. Because of the way the image device (CMOS sensor) reads out image signals, the subjects passing by the lens rapidly might appear crooked depending on the recording conditions. Index US 87