Sony HDR-CX550V Handycam® Handbook - Page 97
Playback on the TV, Dubbing/Connecting to other, devices, HDR-CX550V/XR550V
UPC - 027242788732
View all Sony HDR-CX550V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Playlist. Erase unnecessary movies from the Playlist (p. 51). You cannot add photos in the Playlist. A movie cannot be divided. A movie that is too short cannot be divided. A protected movie cannot be divided. A photo cannot be captured from a movie. The recording media where you want to save photos is full. Playback on the TV Neither image nor sound is played on the connected TV. When you are using the component A/V cable, set [COMPONENT] according to the requirements of the connected device (p. 88). When you are using the component video plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 42). Images are not output from the HDMI OUT jack, if copyright protection signals are recorded in the images. When you are using the S VIDEO plug, make sure the red and white plugs of the A/V connecting cable are connected (p. 43). The top, bottom, right, and left edges of images are trimmed slightly on a connected TV. The LCD screen of your camcorder can display recording images across the entire screen (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. It is recommended you record images using the outer frame of [GUIDEFRAME] (p. 76) as a guide. The image appears distorted on the 4:3 TV. This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV TYPE] correctly (p. 87) and play back the image. Black bands appear at the top and bottom of the screen of the 4:3 TV. This happens when viewing an image recorded in the 16:9 (wide) mode on a 4:3 TV. This is not a malfunction. Dubbing/Connecting to other devices Images are not dubbed correctly. You cannot dub images using the HDMI cable (sold separately). The A/V connecting cable is not connected properly. Make sure to connect the cable to the input jack of another device (p. 64). GPS (HDR-CX550V/XR550V) The camcorder is not receiving a GPS signal. Your camcorder may not be able to receive radio signals from GPS satellites because of obstructions. Bring your camcorder to an open area, and set the GPS switch to ON again. See page 109 for details on locations or situations where radio signals may not reach. The current location on the map of the camcorder is different from the actual current location. The margin of error of the radio signal from GPS satellites is large. The margin of error can be as wide as several-hundred meters at the maximum. US 97 Additional information