Sony HDR-SR10D Operating Instructions - Page 28
Self-diagnosis display/Warning, indicators, You cannot install Picture Motion, Browser.
View all Sony HDR-SR10D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
You cannot install "Picture Motion Browser." • Check the computer environment required to install "Picture Motion Browser." • Install "Picture Motion Browser" in the proper order (p. 25). "Picture Motion Browser" does not work correctly. • Quit "Picture Motion Browser" and restart your computer. Your camcorder is not recognized by the computer. • Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. • Disconnect the USB cable from the computer and the Handycam Station, and restart the computer, then connect the computer and your camcorder again in the proper order. US 28 Self-diagnosis display/Warning indicators If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. Indicators C:04:ss C:13:ss / C:32:ss E:20:ss / E:31:ss / E:61:ss / E:62:ss / E:91:ss / E:94:ss 101-0001 E Causes/Solutions • The battery pack is not an "InfoLITHIUM" battery pack (H series). Use an "InfoLITHIUM" battery pack (H series) (p. 8). • Connect the DC plug of the AC Adaptor to the DC IN jack of the Handycam Station or your camcorder securely (p. 8). • Remove the power source. Reconnect it and operate your camcorder again. • A malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized Sony service facility. Inform them of the 5digit code, which starts from "E." • When the indicator flashes slowly, the file is damaged or unreadable. • An error may have occurred with the hard disk drive in your camcorder. • The hard disk of the camcorder is full. Delete unnecessary images on the hard disk. • An error may have occurred with the hard disk drive in your camcorder. • Battery power is low. • The temperature of your camcorder is getting high. Turn off your camcorder and leave it in a cool place.