Sony HDR-TD10 Operating Guide - Page 59
Self-diagnosis display/Warning, indicators, The recording stops., PMB cannot be installed.
UPC - 027242819955
View all Sony HDR-TD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
The recording stops. The temperature of your camcorder is extremely high/low. Turn off your camcorder and leave it for a while in a cool/warm place. "PMB" cannot be installed. Check the computer environment or installation procedure required to install "PMB" (p. 41). "PMB" does not work correctly. Quit "PMB" and restart your computer. The camcorder is not recognized by the computer. Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. Disconnect the USB cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in an orderly manner. Self-diagnosis display/Warning indicators If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. In this case, when you contact them, give them all the numbers of the error code beginning with C or E. C:04: The battery pack is not an "InfoLITHIUM" battery pack V series. Use an "InfoLITHIUM" battery pack (V series) (p. 14). Connect the DC plug of the AC Adaptor to your camcorder securely (p. 14). C:06: The battery pack temperature is high. Change the battery pack or place it in a cool place. C:13: / C:32: Remove the power source. Reconnect it and operate your camcorder again. E Follow the steps from on page 58. Battery power is low. The battery pack temperature is high. Change the battery pack or place it in a cool place. No memory card is inserted (p. 22). When the indicator flashes, there is not enough free space for recording images. Delete unnecessary images (p. 39), or format the memory card after storing the images on other media. The Image Database File is damaged. Check the data base file by touching (MENU) [Setup] [ ( Media Settings)] [Repair Img. DB F.] the recording medium. The memory card is damaged. Format the memory card with your camcorder (p. 56). Incompatible memory card is inserted (p. 22). The memory card is write-protected. Access to the memory card was restricted on another device. US 59 Additional information