Sony HDWM2100/20 Operation Manual - Page 12
Audio control EMPH emphasis indicator
![]() |
View all Sony HDWM2100/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 2 Location and Function of Parts 2-1 Control Panels 1 Audio control section 2 Audio setting display section 1 DISPLAY FULL/FINE button 2 Audio setting display section 3 Audio monitor signal selection buttons 4 PB controls 1 DISPLAY FULL/FINE button Pressing this button toggles the display mode of the level meters in the audio setting display section between FULL and FINE. FULL: The display covers the range -60 dB to 0 dB or -40 dB to +20 dB as selected using setup menu item 806. In this mode the segment of the display corresponding to the current audio level and all lower segments light. FINE: The display is enlarged, with a step of 0.25 dB. A segment indicating the reference level lights. In this mode only the segment of the display corresponding to the current audio level lights. If the audio level exceeds the maximum display level, the top segment flashes, and if the audio level goes below the minimum display level, the bottom segment flashes. DATA DATA indicator dB OVER dB 0 20 2 -10 110 -20 0 -1 -30 -10 -40 -20 -2 -60 -40 L EMPH R OVER indicator Level meter Monitor channel L and R indicators EMPH indicator DATA indicator: Lights when the audio signals are recognized as data signals. OVER indicator: While the unit is in playback mode, this lights when the level of the audio signal on the corresponding channel exceeds the maximum level that can be indicated on the level meter. Level meter: Displays the audio signal level when the unit is in playback mode. You can use the setup menu to switch the display mode between PEAK.0 (0 dB is maximum level) and REF.0 (0 dB is the reference level). You can also use the DISPLAY FULL/FINE button 1 to enlarge the display only near the reference level. Monitor channel L and R indicators: Indicate whether or not the signals of the track are output to the MONITOR OUTPUT L/R connectors and PHONES jack. 'L' lights to indicate output to the left monitor channel, and 'R' lights to indicate output to the right monitor channel. EMPH (emphasis) indicator: While the unit is in playback mode, this lights when the emphasis setting is on for the audio signal on the corresponding track. 2-4 Chapter 2 Location and Function of Parts
![](/manual_guide/products/sony-hdwm210020-operation-manual-7771e52/12.png)