Sony HMZ-T1 Startup Guide - Page 22

Treble Bass Adjusts high-frequency audio output. Adjusts low-frequency audio output. General Setup Back Set password The name of this setting item changes to "Cancel password" after your password is entered. HDMI pass-through Control for HDMI Returns to the previous menu. A password can be set to restrict use of the system. Once a password is specified, it must be entered each time the system is turned on. To cancel password protection, select "Cancel password" and enter the password. Note • The system automatically turns off in the following situations. Either turn the system on and enter the password again or cancel password protection. - When the password is entered incorrectly, and you close the displayed setting menu by using the MENU or b button - After 90 seconds of inactivity on the password input screen On: Activates pass-through, enabling you to watch or listen to content on a TV or other display device when the system is in standby mode. For details, refer to the "Startup Guide." Off: Deactivates this function. To save power, select "Off" when a TV or other display device is not connected to the processor unit. On: Activates control for HDMI CEC (Consumer Electronic Control)-compatible equipment connected to the processor unit using the v/V/b/B buttons on the head mounted unit. v button: Starts playback. V button: Pauses playback. b button: Jumps to the previous chapter. Hold the button down for fast-rewind. B button: Jumps to the next chapter. Hold the button down for fast-forward. Off: Deactivates this function. Use the remote control of the connected equipment to control it. Note • If control is not possible with this setting activated, the connected equipment is not compatible with the system's "Control for HDMI" function. Control connected equipment directly. 22