Sony HMZ-T3W Reference Guide - Page 35
Set password, Cancel password, Input, HDMI1, HDMI Dynamic, Range, Limited, HDMI pass-through
View all Sony HMZ-T3W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
General Setup Set password Cancel password "Set password" is not available when a password has been set. "Cancel password" is not available when no password has been set. Input Not available when the processor unit is disconnected. HDMI Dynamic Range HDMI pass-through Not available when the processor unit is disconnected. A password can be set to restrict use of the system. Once a password is specified, it must be entered each time the system is turned on. To cancel password protection, select "Cancel password" and enter the password. Note • The system automatically turns off in the following situations. Either turn the system on and enter the password again or cancel password protection. - When the password is entered incorrectly, and you close the displayed setting menu by using the button - After 90 seconds of inactivity on the password input screen Selects the input to the processor unit. The signal input to the selected input jack is displayed on the head mounted unit. HDMI1: Input via the HDMI IN 1 jack HDMI2: Input via the HDMI IN 2 jack HDMI3: Input via the HDMI IN 3 jack Selects the video signal input level. Auto: The system automatically detects the input level. Normally set to "Auto." Full: Select this option when the highlights in the image are blown out or the shadows are blocked. Limited: Select this option when the highlights in the image are dull or the shadows are outstanding. On: Activates pass-through, enabling you to watch or listen to content on a TV or other display device when the system is in standby mode. For details, refer to the "Startup Guide." Off: Deactivates this function. To save power, select "Off" when a TV or other display device is not connected to the processor unit. 35