Sony HT-1700D Primary User Manual - Page 53

SA-WMSP4 for Subwoofer AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, from 28 - 200 Hz; rated 100 watts, minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output (Models of area code U only). Speaker system Active subwoofer, magnetically shielded Speaker unit Woofer: 20 cm cone type Enclosure type Acoustically loaded bass reflex Continuous RMS power output (6 ohms, 20 - 250 Hz) 100 W Reproduction frequency range 28Hz - 200 Hz High frequency cut-off frequency 150 Hz Input LINE IN (input pin jacks) Power requirements 120V AC, 60Hz Power consumption 100 W Dimensions (w/h/d) Approx. 10 3/4 × 12 7/8 × 16 inches including front panel Mass 22 lb 1 oz Supplied accessories FM wire antenna (1) AM loop antenna (1) Speaker connecting cord, long (2) Speaker connecting cord, short (3) Monaural connecting cord (1 phono to 1 phono) (1) Coaxial digital cord (1) Foot pads (speakers) (20) Foot pads (subwoofer) (4) Remote commander (1) • RM-PP411 (HT-6500DP and HT-5500D) • RM-U306 (HT-1700D) R6 (size -AA) batteries (2) Speakers • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Subwoofer (1) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice. continued Additional Information 53US