Sony HT-8800DP Operating Instructions (RDR-GX300 DVD Recorder) - Page 55
Adjusting the picture quality, Select Video Settings, and press
View all Sony HT-8800DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Playback Notes • To enjoy the TVS function, set "Digital Output" to "On" and "Dolby Digital" to "D-PCM" in Audio Setup. • When the playback signal does not contain a signal for the rear speakers, the surround effects will be difficult to hear. • When you select one of the surround modes, turn off the surround settings of the connected TV or amplifier (receiver). • Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. • The TVS function cannot be used with discs recorded on this recorder. Angles and subtitles also cannot be changed. Notes on playing DTS sound tracks on a CD • When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the recorder are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the recorder. • Set the sound to "Stereo" using the AUDIO button when you play DTS sound tracks on a CD (page 53). Notes on playing DVDs with a DTS sound track DTS audio signals are output only through the DIGITAL OUT (COAXIAL or OPTICAL) jack. When you play a DVD with DTS sound tracks, set "DTS" to "On" in Audio Setup (page 77). Adjusting the picture quality +RW -RWVR -RWVideo +R VCD -R DVD 1 Press TOOLS during playback. The TOOLS menu appears. 2 Select "Video Settings," and press ENTER. Video Settings Select the item you want to change. Y NR : 2 C NR : 2 BNR : 2 DVE : Off PB Video Equalizer 3 Select an item, and press ENTER. The adjustment display appears. "Y NR" (luminance noise reduction): Reduces noise contained in the luminance element of the video signal. "C NR" (chroma noise reduction): Reduces noise contained in the color element of the video signal. "BNR" (block noise reduction): Reduces "block noise" or mosaic like patterns in the picture. "DVE" (digital video enhancer): Sharpens the outlines of the images. "PB Video Equalizer" (Playback video equalizer): Adjusts the picture in greater detail. Select an item and press ENTER. • Contrast: changes the contrast. • Brightness: changes the overall brightness. • Color: makes the colors deeper or lighter. • Hue: changes the color balance. ,continued 55