Sony HT-CT60BT Operating Instructions - Page 26
Specifications
View all Sony HT-CT60BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Specifications Formats supported by this system Digital input formats supported by this system are as follows. Format Dolby Digital Linear PCM 2ch 48 kHz or less Supported/Not supported Sound Bar Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 4 ohms loads, both channels driven, from 230 - 20,000 Hz; rated 6 Watts per channel minimum RMS power, with no more than 1 % total harmonic distortion from 250 milliwatts to rated output. POWER OUTPUT (reference) Front L/Front R: 15 W (per channel at 4 ohms, 1 kHz) Canadian models: POWER OUTPUT (rated) Front L + Front R: 7 W + 7 W (at 4 ohms, 1 kHz, 1 % THD) POWER OUTPUT (reference) Front L/Front R: 15 W (per channel at 4 ohms, 1 kHz) Inputs ANALOG OPTICAL COAXIAL BLUETOOTH section Communication system BLUETOOTH Specification version 2.1 + EDR (Enhanced Data Rate) Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx. 10 m*1 Frequency band 2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles*2 A2DP (Advanced Audio Distribution Profile) Supported Codecs*3 SBC*4 Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, operating system, software application, etc. *2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. *3 Codec: Audio signal compression and conversion format *4 Subband Codec Front speaker unit Speaker system 2-way speaker system, Acoustic Suspension Speaker unit Woofer: 25 mm × 120 mm (1 in × 4 3/4 in) Tweeter: 38 mm (1 1/2 in) cone type Rated impedance 4 ohms Power requirements 120 V AC, 60 Hz Power consumption On: 20 W Standby mode: 0.5 W or less 26US