Sony HT-CT660 Operating Instructions - Page 18
Setting up the Wireless System - power cord
View all Sony HT-CT660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1 Prepare screws (not supplied) that are suitable for the holes on the back of the Sound Bar. 4 mm (3/16 inches) More than 25 mm (1 inch) 4 Hang the Sound Bar onto the screws. Align the holes on the back of the Sound Bar to the screws, then hang the Sound Bar onto the 2 screws. 5 mm (7/32 inches) 9 mm (3/8 inches) Hole on the back of the Sound Bar 2 Fasten the screws to the wall. The screws should protrude 6 to 7 mm (approx. 1/4 inches). 680 mm (26 3/4 inches) 6 to 7 mm (approx. 1/4 inches) 3 Remove the center stand. Setting up the Wireless System The Sound Bar transmits sound from the equipment to the subwoofer by wireless communication. 1 Connect the AC power cord (mains lead) of the Sound Bar to a wall outlet (mains). 2 Connect the AC power cord (mains lead) of the subwoofer to a wall outlet (mains). The indicator of the subwoofer lights up in red. If it does not light up, press the button of the subwoofer and wait for the indicator to light up in red. 3 Press the button of the Sound Bar. When the wireless connection is made, the indicator of the subwoofer turns green. If it does not turn green, perform the operations of "Linking the system (LINK)" (page 30). 18US