Sony HT-CT660 Operating Instructions - Page 33
OTHERS, RESET, Additional Information
View all Sony HT-CT660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Change the Wi-Fi frequency of the Wi-Fi router, computer, etc., to 5 GHz band. OTHERS The remote control does not function. Point the remote control at the remote control sensor on the system. Remove any obstacles in the path between the remote control and the system. Replace both batteries in the remote control with new ones, if they are weak. Make sure you select the correct input on the remote control. The Control for HDMI function does not work properly. Check the HDMI connection (page 14). Set up the Control for HDMI function on the TV. Make sure the connected equipment is compatible with "BRAVIA" Sync. Check the Control for HDMI settings on the connected equipment. Refer to the operating instructions supplied with the connected equipment. If you connect/disconnect the AC power cord (mains lead), wait for more than 15 seconds and operate the system. If you connect the audio output of the video equipment and the system using other than an HDMI cable, no sound may be output because of "BRAVIA" Sync. In this case, set the "CTRL" to "OFF" (page 28) or connect the audio output jack directly to the TV instead of the system. "PROTECT" appears on the front panel display. Press to turn off the system. After "STBY" disappears, disconnect the AC power cord (mains lead), then check that nothing is blocking the ventilation holes of the system. RESET If the system still does not operate properly, reset the system as follows: 1 Press to turn on the Sound Bar. 2 Press while pressing INPUT and VOL on the Sound Bar. 3 When "RESET" appears on the front panel display, release the buttons. 4 Disconnect the AC power cord (mains lead). AMP menu, sound field, etc., return to the default settings. Additional Information 33US