Sony HT-S350 Operating Instructions - Page 19
When the TV Remote Control does not Work, Press and hold STANDARD for 5
View all Sony HT-S350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
When the TV Remote Control does not Work When the Bar Speaker obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, enable the IR repeater function of the Sound Bar. You can control the TV with the TV remote control by sending the remote signal from the rear of the Bar Speaker. Press and hold STANDARD for 5 seconds to set the function to on or off. IR repeater on The BLUETOOTH indicator flashes twice. IR repeater off The BLUETOOTH indicator flashes once. Notes • Be sure to check that the TV remote control cannot control the TV, and then set the IR repeater function to on. If it is set to on when the remote control can control the TV, appropriate operation may not be obtained because of the interference between the direct command from the remote control and the command via the Bar Speaker. • If the IR repeater function is set to on, this function may not work depending on your TV. Also, the remote controls of other devices such as an air conditioner may not work correctly. In this case, change the installation position of the Bar Speaker or TV. 19US