Sony HT-S350 Operating Instructions - Page 36
Additional Information, Specifications, Bar Speaker SA-S350
View all Sony HT-S350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Additional Information Specifications Bar Speaker (SA-S350) Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 4 ohms loads, both channels driven, from 200 - 20,000 Hz; rated 18 W per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 mW to rated output. POWER OUTPUT (reference) Front L/Front R speaker: 85 W (per channel at 4 ohms, 1 kHz) Canadian models: POWER OUTPUT (rated) Front L + Front R: 45 W + 45 W (at 4 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) Front L/Front R speaker: 85 W (per channel at 4 ohms, 1 kHz) Inputs TV IN (OPTICAL) Outputs HDMI OUT (TV (ARC)) BLUETOOTH section Communication system BLUETOOTH Specification version 5.0 Output BLUETOOTH Specification Power Class 1 Maximum communication range Line of sight approx. 25 m1) Frequency band 2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) Supported Codec3) SBC4) Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 32 kHz, 44.1 kHz, 48 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone use, reception sensitivity, the operating system, software applications, etc. 2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. 3) Codec: Audio signal compression and conversion format 4) Abbreviation for Subband Codec Front L/Front R speaker block section Speaker system 2 Speaker System Speaker Front L/Front R speaker: 52 mm × 90 mm (2 1/8 in × 3 5/8 in) cone type, 4Ω General Power requirements 120 V AC, 60 Hz Power consumption On: 30 W Standby mode: 0.5 W or less (Power Saving mode) (When Control for HDMI function and BLUETOOTH Standby mode are set to off) Standby mode: 2 W or less* (When Control for HDMI function and BLUETOOTH Standby mode are set to on) * The Sound Bar will automatically enter Power saving mode when 36US