Sony HT-SD35 Operating Instructions - Page 30
Remote Control, Others, The remote control of the Sound Bar
View all Sony HT-SD35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
electromagnetic radiation is nearby, move the device away from the Sound Bar. Pairing may not be possible if other BLUETOOTH devices are present around the Sound Bar. In this case, turn off the other BLUETOOTH devices. Sound of the connected BLUETOOTH mobile device is not output from the Sound Bar. Make sure that the BLUETOOTH indicator on the Bar Speaker is lit (page 8). Bring the BLUETOOTH device close to the Bar Speaker. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from the Sound Bar. Remove any obstacle between the Bar Speaker and the BLUETOOTH device or move the Bar Speaker away from the obstacle. If the Bar Speaker is installed under the TV, move the Bar Speaker away from the TV. Reposition the connected BLUETOOTH device. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to 5 GHz range. Increase the volume on the connected BLUETOOTH device. The sound is not in sync with the image. When you are watching movies, you may hear the sound with a slight delay from the image. Remote Control The remote control of the Sound Bar does not function. Point the remote control at the remote control sensor on the Bar Speaker (page 8). Remove any obstacles in the path between the remote control and the Sound Bar. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control (page 13). The TV remote control does not work. Install the Bar Speaker so that it does not obstruct the remote control sensor of the TV. This problem might be solved by enabling the IR repeater function (page 16). Others The Control for HDMI function does not work properly. Check the connection with the Sound Bar (refer to the supplied Startup Guide). Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the Sound Bar, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the Sound Bar support the Control for HDMI function. Enable the Control for HDMI function of the devices connected to the 30US