Sony HT-SD35 Operating Instructions - Page 31
Bar is turned off., flash for 10 seconds and the Sound
View all Sony HT-SD35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Sound Bar. For details, refer to the operating instructions of your device. The type and number of devices that can be controlled by the Control for HDMI function is restricted by the HDMI CEC standard as follows: - Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices - Playback devices (Blu-ray Disc player, DVD player, etc.): up to 3 devices - Tuner-related devices: up to 4 devices - Audio system (receiver/ headphone): up to 1 device (used by the Sound Bar) All indicators on the Bar Speaker flash for 10 seconds and the Sound Bar is turned off. The protection feature is activated. Disconnect the AC power cord (mains lead) and make sure that the ventilations of the Bar Speaker are not covered and turn on the Sound Bar after a while. Sensors of the TV do not work properly. The Bar Speaker may block some sensors (such as the brightness sensor), the remote control sensor of your TV or the emitter for 3D glasses (infrared transmission) of a 3D TV that supports the infrared 3D glass system, or wireless communication. Move the Bar Speaker away from the TV within a range that allows those parts to operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions supplied with the TV. The Sound Bar does not work properly. The Sound Bar may be in demo mode. To cancel demo mode, reset the Sound Bar. Press and hold - (volume) and (power) on the Bar Speaker for more than 5 seconds (page 32). The following message appears. * This screen is an example for English. Select the TV program by using the TV remote control. 31US