Sony HT-V3000DP Operating Instructions (For SLV-D360P DVD Player) - Page 116
VCR Troubleshooting, Operation, Symptom, Remedy, Playback, Recording
View all Sony HT-V3000DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Operation Symptom Remedy The subtitle language cannot be changed or turned off. • Try using the DVD's menu instead of the direct selection button on the remote (page 77). • Multilingual subtitles are not recorded on the DVD being played. • The DVD prohibits the changing of the subtitles. The angles cannot be changed. • Try using the DVD's menu instead of the direct selection button on the remote (page 77). • Multi-angles are not recorded on the DVD being played. • The DVD prohibits changing of the angles. The player does not operate properly. • When static electricity, etc., causes the player to operate abnormally, unplug the player. VCR Troubleshooting Symptom Remedy The playback picture does not appear on the TV screen. The picture is not clear. • Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. • Adjust the tracking with the TRACKING +/- buttons. • The video heads are dirty (see the last page of "Troubleshooting"). Clean the video heads using a Sony video head cleaning cassette. If a Sony cleaning cassette is not available in your area, have the heads cleaned at your nearest Sony dealer (a standard service fee will be charged). Do not use a commercially available liquid type cleaning cassette, as it may damage the video heads. • The video heads may have to be replaced. Consult your local Sony dealer for more information. Playback The picture rolls vertically during picture search. The picture has no sound. • Adjust the vertical hold control on the TV or monitor. • The tape is defective. • If you made A/V connections, check the audio cord connection. A TV program does not appear on the TV screen. • Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. • Select the correct source with the INPUT SELECT or CH +/- buttons. Select a channel number when recording TV programs; select "L1" or "L2" when recording from other equipment. Recording TV reception is poor. • Adjust the TV antenna. The tape starts playing as soon as it is • The safety tab has been removed. To record on this tape, inserted. cover the tab hole. The tape is ejected when you press • Check that the safety tab has not been removed. z REC. Nothing happens when you press z REC. • Make sure the tape is not at its end. 116 Troubleshooting