Sony HT-V3000DP Operating Instructions (For SLV-D360P DVD Player) - Page 58
To stop recording, To use the DVD-VCR after setting the timer, using the VCR.
![]() |
View all Sony HT-V3000DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
To stop recording To stop the VCR while recording, press x STOP. To use the DVD-VCR after setting the timer To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 44). • Display tape information on the TV screen (page 46). • Check the timer settings (page 59). • Watch another TV program (page 47). Tip • To check, change or cancel the program setting, see "Checking/changing/canceling timer settings" on page 59. Notes • If the VCR does not accept the PlusCode number, this means that: - The PlusCode number is incorrect. - "Once," "Daily," "Mo~Sa," "Mo~Fr" or "Weekly" was selected incorrectly. You cannot select "Daily," "Mo~Sa," "Mo~Fr" or "Weekly" for a program that airs more than seven days ahead. Correctly set the PlusCode number again from step 2. • When the PlusCode number is incorrect, "Invalid code" will appear in the display. 58 Recording TV programs using the VCR Plus+® system (SLV-D560P only)
![](/manual_guide/products/sony-slvd360p-operating-instructions-slvd360p-dvd-player-feb3a4f/58.png)