Sony HT-XT1 Operating Instructions - Page 17
BLUETOOTH, REMOTE CONTROL, Miscellaneous
View all Sony HT-XT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Miscellaneous BLUETOOTH BLUETOOTH connection cannot be completed. Make sure that the illumination LED (blue) is lit (refer to "Listening to the sound from BLUETOOTH devices" in the supplied Startup Guide). System status illumination LED status During BLUETOOTH pairing Flashes quickly in blue The system is attempting to connect Flashes in blue with a BLUETOOTH device The system has established Lit in blue connection with a BLUETOOTH device The system is in BLUETOOTH standby Unlit mode (when the system is off) Make sure the BLUETOOTH device to be connected is turned on and the BLUETOOTH function is enabled. Bring this system and the BLUETOOTH device closer together. Pair this system and the BLUETOOTH device again. You may need to cancel the pairing with this system using your BLUETOOTH device first. Pairing cannot be achieved. Bring this system and the BLUETOOTH device closer together (refer to "Listening to the sound from BLUETOOTH devices" in the supplied Startup Guide). Make sure this system is not receiving interference from a wireless LAN equipment, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this system. No sound is output from the connected BLUETOOTH device. Make sure that the illumination LED (blue) is lit (refer to "Listening to the sound from BLUETOOTH devices" in the supplied Startup Guide). Bring this system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN equipment, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system. Remove any obstacle between this system and the BLUETOOTH device or move this system away from the obstacle. Reposition the connected BLUETOOTH device. Try changing the wireless frequency of the Wi-Fi router, computer, etc. to the 5 GHz band. Increase the volume on the connected BLUETOOTH device. The sound is not in sync with the image. When you are watching movies, you may hear the sound with a slight delay from the image. REMOTE CONTROL The remote control does not function. Point the remote control at the remote control sensor on the system (refer to "Parts and controls" (page 19)). Remove any obstacles in the path between the remote control and the system. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control. continued 17US