Sony HT-XT1 Operating Instructions - Page 21
Specifications, Miscellaneous, Amplifier BLUETOOTH Front L/Front R speaker - support
View all Sony HT-XT1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Specifications Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 3 ohms loads, both channels driven, from 400 - 20,000 Hz; rated 20 Watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. POWER OUTPUT (reference) Front L/Front R speaker: 35 Watts (per channel at 3 ohms, 1 kHz) Subwoofer: 100 Watts (at 4 ohms, 100 Hz) Canadian models: POWER OUTPUT (rated) Front L + Front R: 20 W + 20 W (at 3 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) Front L/Front R speaker: 35 Watts (per channel at 3 ohms, 1 kHz) Subwoofer: 100 Watts (at 4 ohms, 100 Hz) Inputs HDMI IN 1/2/3* ANALOG IN DIGITAL IN (OPT (TV)) * These 3 jacks are identical. Using any of them makes no difference. Output HDMI OUT (TV (ARC)) BLUETOOTH section Communication system BLUETOOTH Specification version 3.0 Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (33 ft)1) Maximum number of devices to be registered 9 devices Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs3) SBC4), AAC5) Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, operating system, software application, etc. 2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. 3) Codec: Audio signal compression and conversion format 4) Subband Codec 5) Advanced Audio Coding Front L/Front R speaker section Speaker system Full range speaker system, Acoustic suspension Speaker 35 mm (1 7/16 in) × 80 mm (3 1/4 in) cone type Rated impedance 3 ohms continued 21US Miscellaneous