Sony HTSS360 Operating Instructions - Page 19

Getting Started TV, etc. Audio signals Audio/video signals C B A L L DIGITAL TV ANTENNA R R AUDIO IN AUDIO IN AUDIO IN COAX IN VIDEO 1 TV SA-CD/CD VIDEO 2 mA MAX HDMI BD IN DVD IN RT OPT IN SAT OPT IN SAT IN AM OUT A A A Audio/video signals Blu-ray disc player Audio/video signals Audio/video signals DVD recorder/ Satellite tuner/ DVD playera) Set-top box A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. B Optical digital cord (not supplied)b) C Audio cord (not supplied)b) a) If you connect a DVD player, be sure to change the factory setting of the DVD button on the remote so that you can use the button to control your DVD player. For details, see "Changing the input button assignments" (page 48). b)Connect at least one of the audio cords (B or C). Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI OUT jack. It is not output from any other audio jacks. • Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack. • The multi/stereo area audio signals of a Super Audio CD are not output. • Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected component. Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable. • Sound may be interrupted when the sampling frequency, the number of channels or the audio format of the audio output signals from the playback component is switched. • When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI OUT jack may be distorted or may not be output. In this case, check the specification of the connected component. • You can enjoy multi channel Linear PCM only with an HDMI connection. • Set the image resolution of the playback component to 720p, 1080i or 1080p when you output 96 kHz multi channel sound over an HDMI connection. • You may need to make certain settings on the image resolution of the player before you can enjoy multi channel Linear PCM. Refer to the operating instructions of the player. • Refer to the operating instructions of each component connected for details. • We do not recommend using an HDMI-DVI conversion cable. When you connect an HDMI-DVI conversion cable to a DVI-D component, the sound and/or the image may not be output. 19US