Sony HXRNX5U User Manual - Page 13

To store the battery pack If the battery pack is not in use for a while, run down the battery and store it. See page 108 for details on storage of the battery pack. Charging time Approximate time (min.) required when you charge a fully discharged battery pack. Battery pack Normal charge Fully charge time time NP-F570 140 200 NP-F770 250 310 NP-F970 365 425 b Notes • Battery pack NP-F770 is supplied with HXR- NX5U, NP-F570 is supplied with HXR-NX5N. • You cannot use the NP-F330 battery pack with your camcorder. On the battery pack • Before changing the battery pack, slide the POWER switch to OFF. • The Battery Info (p. 54) will not be correctly displayed under the following conditions. - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is worn-out. Using an outside power source You can use the AC Adaptor/Charger to obtain AC power. AC Adaptor/ Charger To the wall outlet (wall socket) Power cord Charge lamp Mode switch Connecting cord DK-415 1 Connect the power cord (mains lead) to the AC Adaptor/Charger. 2 Connect the power cord (mains lead) to the wall outlet (wall socket). 3 Connect the connecting cord (DK-415) to the AC Adaptor/Charger. 4 Set the mode switch of the AC Adaptor/ Charger to VCR/CAMERA. 5 Press the connecting part of the connecting cord (DK-415) against the back of your camcorder in the battery slot and slide it down. On the AC Adaptor/Charger • Use the nearby wall outlet when using the AC Adaptor/Charger. Disconnect the AC Adaptor/ Charger from the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor/Charger placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor/Charger or battery terminal with any metallic objects. This may cause a malfunction. Continued , 13 Getting Started