Sony HXRNX5U User Manual - Page 90
Troubleshooting, Power sources/LCD screen/Wireless Remote Commander
View all Sony HXRNX5U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Troubleshooting Troubleshooting If you run into any problems using your camcorder, follow the flow chart below. 1 Check your camcorder, referring to the items on pages 90 to 98. 2 Disconnect the power source, reconnect the power source after about 1 minute and turn on your camcorder. 3 Press the RESET button (p. 121) with a pointed object, then turn on your camcorder. This operation will reset the date, time and area settings. 4 Consult your Sony dealer or local authorized Sony service facility. • Power sources/LCD screen/Wireless Remote Commander···p. 90 • Memory card/flash memory unit···p. 92 • Recording···p. 92 • Playback···p. 95 • Connecting to TV···p. 96 • Dubbing/Editing/Connecting to other devices···p. 97 • GPS···p. 97 • Connecting to a computer···p. 98 Power sources/LCD screen/Wireless Remote Commander The power does not turn on or abruptly turns off. • Attach a charged battery pack to the camcorder (p. 12). • Use the AC Adaptor/Charger to connect to a wall outlet (wall socket) (p. 12). The camcorder does not operate even when the power is set to on. • Disconnect the AC Adaptor/Charger from the wall outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. • Press the RESET button (p. 121) using a sharp-pointed object. The camcorder gets warm. • The camcorder may get warmer while you use it. This is not a malfunction. The remaining battery time indicator does not indicate the correct time. • Ambient temperature is too high or too low, or the battery pack has not been charged enough. This is not a malfunction. • Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace it with a new one (p. 12, 108). • The indicated time may not be correct in certain circumstances. For example, when you open or close the LCD panel, it takes about 1 minute to display the correct remaining battery time. 90