Sony ICD-35 Operating Instructions - Page 32
Selecting the Illumination Mode of LCD Back Light, Press MENU to enter the menu mode., Press
View all Sony ICD-35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Selecting the Illumination Mode of LCD Back Light LIGHT OP: The display window is illuminated for 3 seconds after each operation. LIGHT All: The display window is illuminated at all times during operation. 1 Press MENU to enter the menu mode. 2 Press -= or ++ to display "LIGHT" and press (pPLAY/STOP. "OP (or All)" will flash. 3 Press -= or ++ to select "OP" or "All" and press (pPLAY/STOP. Now the setting is completed. 4 Press MENU to exit the menu mode. When the unit is not being operated (when the display shows the current time), you can illuminate the display window by pressing STOP. This enables you to check the time even in a dark place. Note The effect of the illumination may be reduced in a bright location. 32GB
32
GB
Selecting the Illumination Mode of LCD
Back Light
LIGHT OP: The display window is illuminated for 3 seconds after each
operation.
LIGHT All: The display window is illuminated at all times during
operation.
1
Press MENU to enter the menu mode.
2
Press –
=
or
+
+ to display “LIGHT”
and press
(p
PLAY/STOP.
“OP (or All)” will flash.
3
Press –
=
or
+
+ to select “OP” or
“All” and press
(p
PLAY/STOP.
Now the setting is completed.
4
Press MENU to exit the menu mode.
When the unit is not being operated (when the display shows the current
time), you can illuminate the display window by pressing STOP. This
enables you to check the time even in a dark place.
Note
The effect of the illumination may be reduced in a bright location.