Sony ICD SX57 Operating Instructions - Page 61
Connecting the IC Recorder, to your Computer, Use the USB connecting cable supplied - program
UPC - 027242705258
View all Sony ICD SX57 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Note If you wish to move the software to another drive or directory after it is installed, you need to uninstall the software and then reinstall it. The software does not work properly if you just move the files. Tips You can also start up the uninstaller by clicking [Start] and then selecting [Settings], [Control Panel], and [Add/Remove Programs]. Uninstallation does not remove the message files. To USB connector of your computer To USB jack USB connecting cable (supplied) Connecting the IC Recorder to your Computer You can transfer the IC recorder data onto your computer by connecting the IC recorder to the computer. Use the USB connecting cable supplied with the IC recorder to connect the USB connectors of the IC recorder and your computer. The IC recorder is recognized by the computer as soon as the cable is connected. You can connect or disconnect the cable when the IC recorder and the computer are turned on or off. Notes Be sure to install the Digital Voice Editor software before connecting the IC recorder to your computer. Otherwise, a message like [Found New Hardware Wizard] may appear when you connect the IC recorder to your computer. In this case, click [Cancel]. Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed. Use of this IC recorder with a USB hub or a USB extension cable is not guaranteed. A malfunction may occur depending on the USB devices connected at any one time. Before connecting the IC recorder to the computer, check that batteries are inserted in the IC recorder. Using the IC Recorder with Your Computer 61GB