Sony KDF 55WF655 Operating Instructions - Page 125
General, TIMER/STANDBY LED - blink 4 times
UPC - 027242648517
View all Sony KDF 55WF655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Other Information General Problem Possible Remedies How to reset TV to factory ❏ Turn on the TV. While holding down the RESET button on the remote control, settings press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release the RESET button. How to restore Video settings ❏ Press RESET on the remote control while in the Video menu (see page 98). to factory settings How to restore Audio settings ❏ Press RESET on the remote control while in the Audio menu (see page 102). to factory settings Cannot cycle through the other ❏ Be sure the Label Video Inputs option is not set to Skip (see page 113). video equipment connected to the LCD projection TV Cannot operate Menu ❏ If a menu option appears in gray, this indicates that the menu option is not available. Lost password ❏ In the password screen (see page 108), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. TV makes "popping" sound ❏ This is a normal sound that results from the TV automatically degaussing each when turned on time it is turned on. TIMER/STANDBY LED on ❏ The LED (see page 24 or 126) blinks when the TV is turned on, then shuts off front panel is lit when the picture is displayed. If the LED blinks continuously, this may indicate the TV needs service. When lit, indicates that the timer is set (24 or 126). When the timer is set, this LED will remain lit even when the TV is turned off. Digital cable box does not work ❏ If you are connecting a VCR and digital cable box using a splitter, as described on page 41, you must use a special bi-directional splitter that is designed to work with your digital cable box. Contact your cable provider for details. Cannot record digital channels ❏ Only analog channels can be recorded to your VCR. to VCR The replacement lamp does not ❏ The screw of the lamp cover may be slanted. Take out the screw, insert it straight light up into the screw hole, and then tighten it completely (see page 19 for KDF-WE655 series, see page 22 for KDF-WF655 series). TV cabinet creaks ❏ When the TV is in use, there is a natural rise in temperature, causing the cabinet to expand or contract and may be accompanied by a slight creaking noise. This is not a malfunction. Other Information 125