Sony KDL-32M4000/W Operating Instructions - Page 41
Hidden, Show/Hide, Channels, Parental Lock, POWER
View all Sony KDL-32M4000/W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Condition Certain programs on DVD or other digital sources display a loss of detail, especially during fast-motion or dark scenes. Remote control does not operate. Some digital cable channels are not being displayed. Lost password. How to reset the TV to factory settings. Explanation/Solution ❑ The compression used by certain digital broadcasts and DVDs may cause your TV's screen to display less detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear on your screen. This is due to your TV's large screen and ability to show very fine detail, and is normal for certain digitally recorded programs. ❑ Check the polarity of the batteries or replace the batteries. ❑ Point the remote control at the remote control sensor of the TV. ❑ Fluorescent lamps can interfere with your remote control operation; try turning off the fluorescent lamps. ❑ Keep the remote control sensor area clear from obstacles. ❑ Certain cable companies have limitations on the broadcast of digital cable channels. Check with your cable company for more information. ❑ The digital cable channel may be set to Hidden in the Show/Hide Channels setting (see page 33). ❑ Select the Parental Lock menu, then enter the following master password: 4357. The master password clears your previous password and allows you to enter a new password (page 34). ❑ Turn on the TV. While holding down V on the remote control, press POWER on the TV. Release the V button. WARNING: Parental Lock password may be required if it has been created. The reset will clear all of your customized settings. Other Information 41