Sony KDL-40BX420 Operating Instructions - Page 53

Step 6: Installing the TV on the Base Plate, Refer to the Instructions for SU-WL100.

Get Sony KDL-40BX420 PDF manuals and user guides
UPC - 027242817197
View all Sony KDL-40BX420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Other Information 3 Adjust the angle of the Mounting Hook. Mounting Hook Arm 4 Align the holes on the right Mounting Hook with the corresponding holes on the rear of the TV. Secure them to the TV using two screws (supplied with SU-WL100). Screw (+PSW 4 × 12) Mounting Hook Step 6: Installing the TV on the Base Plate Refer to the Instructions for SU-WL100. 1 Connect the cables to the corresponding inputs on the rear of the TV. For details on the cable connection, see "Connecting Other Equipment" on page 13. 2 Install the TV onto the Base Plate. • When using an electric screwdriver to tighten the screws, the torque must be approximately 1.5 N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for left /right) are secured. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
53
Other Information
3
Adjust the angle of the Mounting Hook.
4
Align the holes on the right Mounting Hook with the corresponding holes on the rear of the
TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Step 6: Installing the TV on the Base Plate
Refer to the Instructions for SU-WL100.
1
Connect the cables to the corresponding inputs on the rear of the TV.
For details on the cable connection, see “Connecting Other Equipment” on page 13.
2
Install the TV onto the Base Plate.
Mounting Hook
Arm
Screw
(+PSW 4 × 12)
Mounting Hook
• When using an electric screwdriver to tighten the screws, the torque must be approximately
1.5 N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for
left /right) are secured.