Sony KDL-46S3000 Operating Instructions - Page 12
Preparation for Wall-Mounting, Models: KDL-26S3000/KDL-32S3000, KDL-32SL130
UPC - 027242710283
View all Sony KDL-46S3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Preparation for Wall-Mounting This TV can be installed on a wall by using a WallMount Bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV. ~ • Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. Follow the simple steps below to remove the Table-Top Stand: 1 Disconnect all the cables from the TV. 2 Gently lay the TV, face down, onto a level and stable surface covered with a thick and soft cloth. Make sure the Table-Top Stand is hanging over the edge. 3 Remove the screws as shown in the illustration for your model and pull the TableTop Stand out. 4 Do not remove any other screws from the TV. ~ • Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children. • For bracket installation, refer to the instruction guide provided by the Wall-Mount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wallmounting of your TV should be performed by a Sony dealer or licensed contractor. Models: KDL-26S3000/KDL-32S3000/ KDL-32SL130 Remove 3 designated screws only. Models: KDL-40S3000/KDL-46S3000/ KDL-40SL130 Remove 4 designated screws only. Level surface covered with a soft cloth Table-Top Stand Level surface covered with a soft cloth Table-Top Stand 12