Sony KDL-46S3000 Operating Instructions - Page 20

Using HDMI Control for BRAVIA Theatre Sync™ This TV is equipped with BRAVIA Theatre Sync. The HDMI Control function enables BRAVIA Theatre Sync to allow communication between Sony TV's and Sony equipment. Only Sony equipment with HDMI Control capability is supported. To connect HDMI Control equipment Use an HDMI cable that bears the HDMI logo for connection. See pages 16 to 19 or see the HDMI connection shown in the Quick Setup Guide provided with the TV documentation. Setting the HDMI Control In order for the HDMI Control function to operate, the TV and other Sony HDMI Control equipment must be setup. See page 39 on how to turn the HDMI Control On. For other equipment, refer to the operating instruction for that equipment. HDMI Control available with your TV Once the supported equipment is connected, the following operations are available: • Turn off the equipment automatically when you turn off the TV. • When the connected equipment is turned on by One-Touch-Play, the TV will automatically turn on and select the respective HDMI input. • Automatically turn on equipment listed under the External Inputs on the XMB™ (XrossMediaBar) when selected, see pages 9 and 28. When a Sony A/V receiver with BRAVIA Theatre Sync is connected, the following additional operations are possible: • Turning on the A/V receiver when the TV is turned on. • Automatically switching to the audio output of the A/V receiver's attached speakers. • Adjusting the volume and muting of the A/V receiver with the TV's remote control. ~ • The A/V receiver cannot be selected from the XMB™. Bundling the Connecting Cables You can bundle the connecting cables as illustrated below. 1 2 ~ • Do not bundle the AC power cord with other connecting cables. • The cable holder can be attached in either direction. 20