Sony KDL-46W3000 Operating Instructions - Page 26

Programming the Remote Control 2 3 2 4 Operating Sony Brand Video Equipment The remote control is preset as below so that you do not need to program the remote control. Sony Equipment BD DVD STB Programmable Code Number 101 (Sony Blu-ray Disc Player) 751 (Sony DVD Player) 801 (Sony Satellite Receiver) Programming Non-Sony Video Equipment Follow the steps below to program your TV's remote control. 1 In the space provided below, write down the three-digit code of your equipment found on the Manufacturer's Codes List on page 27. If more than one code is listed, try entering the code listed first. Code No. 2 Press and hold , or and simultaneously to light the FUNCTION button. 3 Enter the three-digit code using - while the selected button is lit. If the code is not entered within 10 seconds, you must repeat step 2. 26 4 Press while the FUNCTION button is lit. If programmed correctly, the selected FUNCTION button blinks twice. If not it blinks five times. To Confirm the Programming If you can turn on and off the equipment by pressing the green POWER button, then the programming is complete. If not, try the next code listed. ~ • In some cases, you may not be able to program your remote control. If this is the case, use your equipment's own remote control. • Any one of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, can operate DVD/VCR combo equipment. This is useful if your equipment does not match the labeled buttons available. Make note of your equipment's programmed button.